Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Push<br />
Read<br />
Optional PORT2<br />
Expansion for<br />
Hand Controller<br />
INTRODUCING THE MP3000 Master Control Unit<br />
10.062<br />
Built-in Self Test for EXPANSION<br />
Modules verifies operation<br />
Connection for REMOTE<br />
Table I/O Card for<br />
Inputs and Outputs<br />
Input for EXPANSION<br />
Modules (DTHC, SPINDLE SPEED)<br />
MP3000 INTRO<br />
MP3000<br />
Multi-Axis Interface<br />
EXPANSION<br />
MODULE<br />
TEST<br />
DTHC / SPS<br />
PORT2 OPTION<br />
INPUT<br />
Isolated Table I/O<br />
3.266<br />
1 5<br />
6 9<br />
Multi-Axis Interface<br />
SERIES E<br />
Hand Controller<br />
UBOB II<br />
Technology<br />
Port1 INPUT<br />
To PC<br />
CP PWR<br />
SERIAL INPUT<br />
To PC<br />
SINGLE PORT<br />
Interface<br />
PORT EXPANDER<br />
Technology<br />
Indicator for Charge Pump active<br />
True RS232 Serial signals<br />
Used for DTHC and ISS-02<br />
Interface to MACH<br />
Basic Features<br />
Expanded Single port interface + serial (True RS232 signals)<br />
Modular design allows for easy upgrades and easy repair<br />
Bi-directional communication with MACH3<br />
100% Digital Control<br />
Field Ungradable to DTHC or Spindle Speed with single plug-in card<br />
Custom Screens allow 100% control form MACH3<br />
Charge Pump Active Indicator<br />
Unit is plug compatible with other quality <strong>CandCNC</strong> products<br />
Buffered Step & Direction (4 or 5 axis operation options)<br />
All 8 power outputs double buffered: all 9 inputs opto isolated<br />
Rear Panel connector for MPG (hand controller)<br />
Exclusive remote Table I/O card makes hooking up homes and limits quick and easy. Two High Current relay outputs at the table where they belong.<br />
All connects made via standard data cables (DB25 & DB9)<br />
Universal Power Pak allows operation world wide<br />
Works with any TTL level step & dir type motor drives including ALL versions of Gecko drives<br />
Included interface card for multiple output options<br />
Quality components. Designed and built in the USA.<br />
Two Year Warranty Parts and Labor. Free unlimited support<br />
DTHC Features<br />
Voltage control to + - 1/4 volt<br />
Built-in self test<br />
Usable with hand or machine torches<br />
Optional Arc Good sensor for machines not equipped with that signal.<br />
Presettable volts from MACH3 screen or from Cut Profile.<br />
Unlimited Cut Profiles store/recall critical settings; Select your material from a list. Edit.Add new profiles<br />
Full DTHC operation from one screen in MACH<br />
TOTAL DC (analog) ISOLATION between Plasma (Tip Volts) and computer/controller logic<br />
On-the-fly push button adjustment for Preset Volts allows dynamic height adjust<br />
New “TIP SAVER” feature has Head Lock to prevent diving on turns or over voids<br />
Last setting retained on power down<br />
Advance Digital Torch Height Controller responds thousands of times per second<br />
Advanced logic functions like Auto THC enable, Torch off on Fault, Stop on fault, etc<br />
Optimized for use with touch-n-go surface sensing<br />
Compatable with SheetCAM
Change language