Technical Specification for - Gujarat Electricity Board

TECHNICAL SPECIFICATION FOR
SDH/PDH Equipment with integrated Access Multiplexer
Ethernet B: 10BaseT ports
L3 Routing function
Routing protocols
WAN capacity
WAN ports
WAN protocol
Mbit/s
ports
Integrated Ethernet Hub 10/100BaseT ports
Integrated alarm gathering module:
Number of external alarms per module
Auxiliary power supply for ext. contacts
Configuration Management:
Type/Name of configuration tool
Available for local operation
Available for remote operation
Data communication network (DCN)
Integrated Management of
Teleprotection Command module possible
Network Management System
Type/Name of configuration tool
Available for fault management
Available for configuration management
Data communication network (DCN)
Integrated Management of
Teleprotection Command Module possible
Remote Access package available
Ambient Conditions:
1x RJ45
YES/NO
static IP routing
OSPF2 V2
N x 2Mbit/s
(64kbit/s granularity)
> 30
PPP
Min. 6x RJ45
Min. 8 Nos.
YES/NO
YES/NO
Ethernet / IP
YES/NO
YES/NO
YES/NO
Ethernet / IP or
Ethernet / OSI
YES/NO
YES/NO (If Yes pl.
provide details)
Storage:ETS 300 019-1-1, class 1.2 °C / % hum - 25 … + 70°C / 98%
Transport:ETS 300 019-1-2, class 2.2 °C / % hum - 25 ... + 70°C / 98%
Operation:ETS 300 019-1-3, class 3.2 °C / % hum -20 … +55°C / 95%
Power Supply
Operation (VDC) 48 VDC (-/+ 15%)
Fully redundant power supply available
Dual power feeder available
YES/NO
YES/NO
SUPPORTED BY
OFFERED SYSTEM
(To be filled up by
bidder)
N=
Sign & Seal of Bidder
GETCO/E/TS-SDH/PDH FOTE/R1, Dt:16.04.2011
Page 26 of 60