Technical Specification for - Gujarat Electricity Board

TECHNICAL SPECIFICATION FOR
SDH/PDH Equipment with integrated Access Multiplexer
2.26. INFORMATION TO BE FILLED IN INVARIABLY BY THE BIDDER:
For ready reference of the purchaser, the items of information required to be
invariably furnished by him in his offer, are listed below:
2.26.1. A copy of the authentic English translation of each of the standards to which
the offered equipment conforms.
2.26.2. Schedule - `A1’ to `E1’.
2.26.3 Documents and drawing listed in Clause no.2.21.
2.26.4. Documents specified in clause no.2.18
2.27 UNIT RATE FOR EACH ITEM OF BOQ.
2.27.1. The bidder has to submit along with their offer unit rate for all the items of
FOTE configuration given in Schedule of BOQ including items of spares
and listed SFPs, Wave length converter & booster at clause No. 2.15.
The offers without above unit rate are likely to be rejected.
2.27.2 The above unit rate shall be kept valid till the expiry of guarantee period.
2.28. REQUIREMENT FOR FIRST TESTING AND COMMISSIONING
2.28.1. Any modifications required by the purchaser at site shall be carried out by the
successful bidder at the time of commissioning, free of cost.
2.28.2. The successful bidder has to provide reproducible tracings for all the drawings
as a part of supply contract to the CE (Project) GETCO, Corp office,
VADODARA for documentation.
2.28.3. The successful bidder has to supply necessary tools/kits accessories required
for satisfactory operation of FOTE, as a part of supply contract to each
Consignee / destination.
2.28.4 The successful Bidder has to provide instruction manual, all drawings, literature
etc. for all FOTE, write up for testing and commissioning procedures, setting
calculations, NMS Documents including operational procedure, digital cross
connection details with time slots and settings adopted for individual FOTE as
commissioning document and trouble shooting protocols to all
consignee/destinations as well as to the SE (Telecom), GETCO, and the
CE (Projects) GETCO, HO, VADODARA.
2.28.5. The successful bidder has to do installation, testing/commissioning of each
FOTE configuration offered for sub-station, by deputing his Service Engineer.
The 10% value of total Ex-Work price of supply Part-A is to be retained over
and above the money retained as per payment terms of the GETCO and the
same is to be released after satisfactory testing and commissioning of the all
the FOTE & NMS and all other equipments necessary for successful
completion of overall network operation.
Sign & Seal of Bidder
GETCO/E/TS-SDH/PDH FOTE/R1, Dt:16.04.2011
Page 58 of 60