Technical Specification for - Gujarat Electricity Board

TECHNICAL SPECIFICATION FOR
SDH/PDH Equipment with integrated Access Multiplexer
2.12 PREQUALIFICATION REQUIREMENTS:
Bidder shall have to satisfy all the following requirements.
[A]
Technical requirement:
1. 0 Individual Bidder:
a) The bidder shall be Original Equipment Manufacturer of the SDH (STM -1)
equipment with integrated Access Multiplexer asked for this tender
specification. The offered equipments should have been designed,
manufactured, tested & comply with relevant Standards Specified in clause No.
2.11 of technical specification & also with latest amendments.
b) The bidder shall have the experience of at least 5 years of supply &
Commissioning of offered equipment and shall have supplied & commissioned
at least tender quantity of FOTE same as offered during last 5 years to State
Transmission/Power Utilities/IPPs/CPPs/PGCIL & for that a certificate of a
Chartered Accountant required to be submitted along with the bid. The PO
copy, proof of dispatch and commissioning report should also require to be
submitted with the bid.
c) The bidder should clearly indicate the quantity and single value contract
executed during last FIVE (5) years, for the offered equipment.
The details of past supplies should cover,
(i) Same Configuration equipment as Offered. The details are to be submitted
Sr.
No
in following format,
ITEMS
SUPPLIED
TO
ORDER
REFERENCE
No. & DATE
ITEMS
QUANTITY
ORDER FULLY
EXECUTED
YES/NO
STATUS, IF
ORDER UNDER
EXECUTION
REMARK
d) The bidder shall have to submit performance certificates for FOTE similar to
offered supplied to other State Power Utilities/ IPPs /CPPs /PGCIL & private
electricity Supply Company during last 5 years which must include the
satisfactory performance certificates for last THREE (1) years for FOTE offered
in the tender bid which should have to meet all the stipulated requirement of
TS. (Supporting documents/certificates of original customer to be submitted)
e) The bidder shall furnish the copies of valid type test reports for the offered
equipment from NABL accredited Laboratory or KEMA type tested.
f) The bidder shall have to submit the certificate for satisfactory after sales
services extended for last Five years for maintenance as well as technical
support for integrating older version FOTE supplied over the period of time to
state power utilities / IPPs / CPPs / PGCIL & Private Electricity Supply
Company with new version FOTE same as offered supplied.
g) The bidder should have to confirm the service and spares support for at least
10 years after the guarantee period.
h) The bidder should have to confirm for guarantee of 5 years from the date of
receipt of equipment in store in good condition or three years from the date of
commissioning of offered FOTE at respective Sub-station which ever will be
earlier. For executing the installation & commissioning GETCO will inform as
and when required considering Project execution stage.
i) Bidder should have executed at least 2 projects in power utilities for
400/220/132 KV sub-stations with teleprotection equipments (both for distance
protection commands and line differential protection).
Sign & Seal of Bidder
GETCO/E/TS-SDH/PDH FOTE/R1, Dt:16.04.2011
Page 49 of 60