PDF EN - Tornos
PDF EN - Tornos
PDF EN - Tornos
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The present<br />
ORTHODONTIC APPLICATION ON<br />
ALMAC FB 1005<br />
The milling centre working on the Almac FB 1005<br />
bars demonstrates in practice the synergy between<br />
<strong>Tornos</strong> and Almac products. One of these machines<br />
was installed recently to produce parts intended for<br />
the dental sector.<br />
Application<br />
Production of attachments for orthodontic appliances<br />
is specially designed to correct teeth positions.<br />
They are made-to-measure primarily for children but<br />
also for adults.<br />
Benefits<br />
The FB 1005 centre has six CNC axes including a<br />
B-axis which allows “angular” machining to be performed.<br />
The production of fully completed part families<br />
is simplified by the availability in counter-operation<br />
of fully adaptable work holders. The FB 1005<br />
is of completely open, modular design. This means<br />
that the standard configuration can be enhanced by<br />
a series of add-on equipment depending on the part<br />
types or complexity.<br />
Characteristics<br />
Rotation speed : 1,000 to 12,000 rpm.<br />
Mechanical power : 1.4 / 3.4 kW<br />
(100%/ 25 % ED)<br />
Clamp / tool holder cone : ESX 20 / HSK 32<br />
Clamping diameter 1 to 13 mm<br />
X / Y / Z travel :<br />
280 / 230 / 120 mm<br />
Available spindles<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
The typical cycle time for dental attachments is about<br />
40 seconds and depends on the complexity.<br />
8 decomagazine<br />
02 / 09
Change language