2011 Filter and Fluid Application Guide PEWJ0074-04

Pipelayers
Lubricants - Final Drives/Differentials
1037366
The product(s) listed below are the Caterpillar preferred product. For additional options, please consult the Caterpillar Machine
Fluids Recommendations (SEBU6250).
Oil Type and Category
Oil Viscosities Min °C Max °C Min °F Max °F
Final Drive
Cat TDTO Cold SAE 0W-20 -40 0 -40 32
Weather
Cat TDTO SAE 10W -30 0 -22 32
Cat TDTO SAE 30 -25 35 -13 77
Cat TDTO SAE 50 -15 50 5 122
Cat TDTO-TMS Cat TDTO-TMS -30 25 -22 77
Greases
1037380
Application Point: Adjust Track, Angle Blade Tilt Brace, Equalizer Bar Pins, Fan Drive Belt Tightener, Lift Cylinder Yoke Bearing,
Winch Drum Bearing, Winch Fairlead Rollers
Typical Applications
(Load and Speed)
High
Load Factor Ambient Temperature
Range (°C) Min, ture Range (°F) Min,
Ambient Tempera-
Max
Max
Ditching, fill spreading,
spreading base
material, ripping,
heavy road maintenance,
snow
plowing.
NLGI Grade
Recommended
Grease Type
-30, 50 -22, 122 2 Ultra 5Moly Grease
High -35, 40 -31, 104 1 Ultra 5Moly Grease
High -40, 35 -40, 95 0 Ultra 5Moly Grease
Medium
Average road maintenance,
road mix
work, scarifying,
snow plowing.
-20, 40 -4, 104 2 Advanced 3Moly
Grease
Low
Finish grading, light
maintenance, road
travel.
-30, 40 -22, 104 2 Multipurpose
Grease
1037387
Filters
The “Part Number” column represents the “As Shipped” filters. As Shipped filters are the minimum recommendations for filter
efficiency for that particular system. Higher efficiency filters may be used, but to prevent damage do not use lower efficiency
options.
2288489
PL61
Filter needs differ between machine arrangements. Filters for engines are listed separately from machine arrangements. Engine
filters are designated by “(Engine)” following the model. Please review both machine and engine arrangements carefully before
finalizing filter selection.
Cat Machines
(Continued)
465