2011 Filter and Fluid Application Guide PEWJ0074-04

Lubricants
2313053
Cat ® SAEO (Continued)
Fluid Information and Part Numbers
Typical Characteristics {A}
SAE Viscosity Grade SAE 30 SAE 40
Manufacturer 1K 1K
Manufacturer C4
Flash Point, °C (ASTM D92) 232 232
Pour Point, °C (ASTM D97) -23 -18
Viscosity cSt @ 100°C (ASTM 11.0 14.0
D445)
Sulfated Ash, % wt. (ASTM 0.9 0.9
D874)
TBN (ASTM D2896) 6.5 6.5
Zinc, % wt. (ASTM D1549) 0.12 0.12
Phosphorus, % wt. (ASTM 0.10 0.10
D1091)
{A} The values shown are typical values and should not be used as quality control parameters
to either accept or reject product. Specifications are subject to change without notice.
English Volume (gal) Metric Volume (L) Part Number
SAE 30
1 -- 170-5262
5 -- 198-7368
Bulk -- 161-5824
-- 20 9X-6462
-- 208 9X-6463
English Volume (gal) Metric Volume (L) Part Number
SAE 40
1 -- 170-5261
5 -- 198-7369
-- 20 7X-7840
-- 208 7X-7843
1
Cat SAEO should not be used in 3406, 3126, C-10, C-12, or 3116 low emission on-highway truck engines. Use Cat DEO multi-grade oils.
2313083
Cat ® FDAO
Recommended Use
• Preferred lubricant for Cat Off-Highway Truck front wheels, differentials and final drives.
• Preferred lubricant for Cat Large Track-Type Tractor, Pipelayer, and Track Skidder final
drives (steel-tracked machines with elevated final drives except the D5M, D6M and 561M).
• Compatible with Cat final drives and axles that previously specified TO-4 lubricants and do
not contain friction material.
Discover the Difference
• Cat FDAO is developed, tested and approved by Caterpillar to meet the same high standards
as all genuine Cat parts.
• Factory-Fill - Used as standard factory-fill for Cat Off-Highway Trucks and Large Track-Type
Tractors.
• Extended Drain Intervals - Allows for double-length drain intervals in off-highway truck
final drives, as compared to TO-4 commercial oils.
• Minimal Foaming - Formulated to protect against the damaging effects of air.
(Continued)
746