2011 Filter and Fluid Application Guide PEWJ0074-04

Fluid Information and Part Numbers
Lubricants
2312666
Cat ® DEO Monograde
For 2312708 Cat 3600 Series Diesel Engines
Recommended Use
• Cat DEO Monograde is the only oil approved by Caterpillar for use in the 3600 series diesel engines operating on distillate
diesel fuels.
• Cat DEO Monograde is recommended for older Cat engines equipped with precombustion fuel injection systems that permit
the use of American Petroleum Institute CD or CF oil.
• Cat DEO Monograde can be used with low-sulfur diesel fuel and protects Cat engines operating on higher sulfur diesel fuels
(3600 series engines operating on fuel containing up to 1.30% sulfur, and precombustion engines operating on fuel containing
up to 0.065% sulfur fuel.)
Discover the Difference
• Cat DEO Monograde is developed, tested and approved by Caterpillar to meet the same high standards as all Genuine Cat
Parts.
• Factory-Fill - Used as standard factory-fill for Cat 3600 series diesel engines.
• Increased Engine Life - Resists oxidation and prevents build-up of deposits on pistons and rings.
• Extended Drain Intervals - Extends oil drain intervals while providing excellent engine protection and performance when
used in conjunction with our S•O•S Services oil analysis program.
• Proven Performance - Tested in Cat 3600 series diesel engines worldwide.
Typical Characteristics {A}
SAE Viscosity Grade
SAE 40 {B}
API Service Classification
CF {C}
CCMC
D3
Caterpillar Performance Level (engine)
1M-PC
Allison Performance Level (transmission) C-3
Flash Point, °C (ASTM D92) 234
Pour Point, °C (ASTM D97) -33
Viscosity cSt @ 40°C (ASTM D445) 133
Viscosity cSt @ 100°C (ASTM D445) 13.8
Viscosity Index (ASTM D2270) 100
Sulfated Ash, % wt. (ASTM D874) 1.9
TBN (ASTM D2896) 13.0
Zinc, % wt. (ASTM D4951) 0.12
Gravity @ 16°C API (ASTM D287) 26.2
Phosphorus, % wt. (ASTM D1091) 0.11
{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product.
Specifications are subject to change without notice.
{B} Passes FZG DIN 51354-2 A/8, 3/90 FLS 12.
{C} Can be used in applications where the obsolete API CD classification oil is recommended.
English Volume (gal) Metric Volume (L) Part Number
SAE 40
0.250 (1 Qt.) -- 8C-3707
1 -- 8C-3706
5 -- 8C-3705
55 -- 8C-3704
Bulk -- 155-6202
-- 18 9X-2004
-- 19 9X-8529
English Volume (gal) Metric Volume (L) Part Number
SAE 40 (Continued)
-- 20 7X-7843
-- 200 9X-8528
-- 205 7X-7842
-- 1,000 9X-6272
-- 1,200 203-1044
-- 2,000 119-5134
-- 10,000 119-5133
-- 10,004 8C-3703
736