06.01.2015 Views

2011 Filter and Fluid Application Guide PEWJ0074-04

2011 Filter and Fluid Application Guide PEWJ0074-04

2011 Filter and Fluid Application Guide PEWJ0074-04

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Fluid</strong> Information <strong>and</strong> Part Numbers<br />

Coolants<br />

2313463<br />

Health <strong>and</strong> Safety<br />

Under normal conditions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye, skin<br />

or respiratory irritation. Always observe good hygiene measures. Read <strong>and</strong> underst<strong>and</strong> the Material Safety Data Sheet (MSDS)<br />

before using this product. For a copy of the MSDS, visit us on the web at www.catmsds.com.<br />

2313470<br />

Cat ® ELC<br />

Recommended Use<br />

• Cat ELC meets or exceeds the requirements of the following specifications <strong>and</strong> guidelines:<br />

• Cat EC-1<br />

• ASTM D-3306<br />

• ASTM D-6210<br />

• TMC RP-329<br />

• TMC RP-338<br />

• SAE J1034<br />

Discover the Difference<br />

• Cat ELC is developed, tested <strong>and</strong> approved by Caterpillar to meet the same high st<strong>and</strong>ards<br />

as all genuine Cat parts.<br />

• Factory-Fill - Used as st<strong>and</strong>ard factory-fill for all Cat machine cooling systems.<br />

• Lower Maintenance Costs - Reduces engine coolant <strong>and</strong> additive costs by as much as<br />

500% compared to conventional coolants. CAT ELC eliminates the need for supplemental<br />

coolant additives, extends coolant change-out intervals <strong>and</strong> reduces disposal requirements.<br />

• Advanced Metal Protection - Incorporates an advanced formula technology with organic<br />

acid additive corrosion inhibitors, such as a combination of mono <strong>and</strong> dicarboxylates for<br />

maximum protection of copper, solder, brass, steel, cast iron <strong>and</strong> aluminum.<br />

Typical Characteristics {A}<br />

Color<br />

Strawberry Red<br />

Boiling protection with 15 psi (1 bar) radiator cap<br />

50% Cat ELC/50% water 129°C (265°F)<br />

60% Cat ELC/40% water (ELC concentrate 132°C (270°F)<br />

added)<br />

Freezing protection<br />

50% Cat ELC/50% water -37°C (-34°F)<br />

60% Cat ELC/40% water (ELC concentrate -52°C (-62°F)<br />

added)<br />

Nitrite (50% solution)<br />

500 ppm<br />

Molybdate (50% solution)<br />

530 ppm<br />

{A} The values shown are typical values <strong>and</strong> should not be used as quality control parameters<br />

to either accept or reject product. Specifications are subject to change without notice.<br />

English Volume<br />

English Volume Metric Volume<br />

Metric Volume<br />

-- 200 215-4242 2 275 -- 361-1024<br />

(gal)<br />

(L)<br />

Part Number<br />

(gal)<br />

(L)<br />

Part Number<br />

Cat ELC Concentrate (with embitterment)<br />

Cat ELC Premix 50/50 (with embitterment) (Continued)<br />

-- 5 205-6615 1<br />

-- 5 215-4245 4<br />

-- 5 215-4244 2<br />

-- 20 215-4246 4<br />

1 -- 238-8647<br />

-- 1000 237-4953 5<br />

-- 4 348-8223 3<br />

1 -- 238-8648<br />

Cat ELC Premix 50/50 (with embitterment)<br />

5 -- 238-8649<br />

-- 5 205-6611 1<br />

55 -- 238-8650 6<br />

-- 20 205-6612 1<br />

-- 4 348-8220 3<br />

-- 210 205-6613 1<br />

-- 18 348-8221 3<br />

-- 1000 205-6614 1<br />

-- 200 348-8222 3<br />

1<br />

EAME - Europe, Africa, Middle East<br />

2<br />

Brazil<br />

3<br />

APD - China<br />

4<br />

LACD - Brazil<br />

5<br />

APD - Australia<br />

6<br />

NACD - North America<br />

762

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!