2011 Filter and Fluid Application Guide PEWJ0074-04

Telehandlers
Coolants
1039356
Cat Recommended Coolants
Coolant Type Service Life {1}
Cat ELC 12,000 Service Hours or Six Years {2,3}
Cat DEAC 3,000 Service Hours or Three Years {3}
{1} Use the interval that occurs first.
{2} Add Cat ELC Extender at 6,000 service hours or one half of the service life for the ELC.
{3} These coolant change intervals are only possible with annual S·O·S Level 2 coolant sampling
and analysis.
Lubricants - Engine Crankcase
1039363
The product(s) listed below are the Caterpillar preferred product. For additional options, please consult the Caterpillar Machine
Fluids Recommendations (SEBU6250).
Oil Type and Category
Oil Viscosities Min °C Max °C Min °F Max °F
Engine Crankcase
Cat DEO SAE 15W-40 -9.5 50 15 122
Cat DEO SAE 10W-30 -18 40 0 104
Cat DEO-ULS SAE 15W-40 -9.5 50 15 122
Cat DEO-ULS SAE 10W-30 -18 40 0 104
Cat DEO-ULS Cold SAE 0W-40 -40 40 -40 104
Weather
Lubricants - Hydraulic System
2177713
The product(s) listed below are the Caterpillar preferred product. For additional options, please consult the Caterpillar Machine
Fluids Recommendations (SEBU6250).
Oil Type and Category
Oil Viscosities Min °C Max °C Min °F Max °F
Hydraulic System, Service Brake System, Transmission, Differentials and Final Drives
Cat TDTO Cold SAE 0W-20 -40 40 -40 104
Weather
Cat TDTO SAE 10W -20 40 -4 104
Cat TDTO SAE 30 10 50 50 122
Cat TDTO-TMS TDTO-TMS -20 50 -4 122
Greases
1039370
Application Point: Boom Chain, Boom Cylinder Pin, Boom Extension and Retraction Chain Pulley, Boom Head Section, Boom Pivot
Shaft, Compensating Cylinder Bearing, Drive Shaft Spline, Fork Leveling Cylinder Pin, Frame Leveling Cylinder Pin, Stabilizer and
Cylinder Bearings
Typical Applications Load Factor Ambient Temperature
Ambient Tempera-
NLGI Grade Recommended
(Load and Speed)
Range (°C) Min, ture Range (°F) Min,
Grease Type
Max
Max
High
Heavy loading, continuous
-30, 50 -22, 122 2 Ultra 5Moly Grease
loading with
steady cycling.
Medium
Normal load and -20, 40 -4, 104 2 Advanced 3Moly
work conditions.
Grease
Low
Considerable idling
or travel with no
load.
-30, 40 -22, 104 2 Multipurpose
Grease
Cat Machines
501