Operations Manual - Tele-Traffic

More documents

Recommendations

Info

Alternatively if Prints are not taken as above and the disk is later analysed at an administrative unit then the DVD Disk becomes "best evidence" and must be retained. Any Prints taken in any such analysis are likely to be deemed “secondary evidence”. The Memory Buffer in the Printer, (if fitted) allows an Operator to target vehicles at very short intervals typically under one second and thus the equipment in this configuration remains as fast as the LTI 20.20 Laser in the conventional hand held mode. The video signal on the loop is simultaneously received by the DVD Recorder/Monitor and recorded on the DVD disk and in accordance with the comments above provides "best evidence". The data appears visibly in plain English and provides: TIME, DATE, SITE (or OFFICER'S REFERENCE) SPEED and RANGE TO TARGET If the target vehicle is above the set threshold speed then an asterisk will also appear. The position of the data on the Screen can be controlled by the Operator. At the same time, the data is inserted on the DVD Disk in an invisible form in a technique that resembles a bar code. This completes the sequence of events at the scene but as suggested above it is possible to analyse the DVD disk in the office situation. This process uses the Event Reader in conjunction with the Printer and means that when the video signal is played through it a search is automatically conducted for data over the threshold speed and a Video Print produced. This can be an unattended operation. Data can be downloaded simultaneously into a Computer for administrative purposes. In addition to the asterisk there is another symbol that appears only in the record mode. Situated in the bottom left corner of the screen there is a hash mark (#) feature which when pressed on screen allows the operator to mark an event. ( An example of this might be if the operator has set the threshold limit to enforce for cars and sees another type of vehicle exceeding the permitted speed limit for that class of vehicle he can mark the event and still obtain a speed reading which can be downloaded and identified later. Other examples might be No seat belt or using a mobile phone whilst driving.) © Copyright – Tele-Traffic (UK) Limited 2007 9
SECTION 3 OPERATOR INSTRUCTIONS CONTENTS: Assembly Procedure Camera Control Unit Controls Camera Control Unit Adjustments © Copyright – Tele-Traffic (UK) Limited 2007 10
Page 1 and 2: LTI 20.20 Laser Speed Measurement D
Page 3 and 4: IMPORTANT! THESE INSTRUCTIONS SHOUL
Page 5 and 6: Lastec Concept Component Parts. The
Page 7 and 8: 12. TAPELOGGER Here there is a chan
Page 9: LASTEC CONCEPT SYSTEM APPLICATION H
Page 13 and 14: ASSEMBLY PROCEDURE 1. Mount the LTI
Page 15 and 16: ADJUSTING THE DISPLAY CONTROL UNIT
Page 17 and 18: 2. Highlight the ‘SET LIMIT OPTIO
Page 19 and 20: 6. Adjusting the speed limit in the
Page 21 and 22: 4. Highlight the ‘SET SPEED TIMEO
Page 23 and 24: 2. Highlight the ‘SET USER NUMBER
Page 25 and 26: 2. Highlight the ‘SET TIME/DATE
Page 27 and 28: 2. Highlight the ‘SET CROSS-HAIR
Page 29 and 30: 6. Adjusting the cross-hair positio
Page 31 and 32: 4. Highlight the ‘SET TYPE’ sel
Page 33 and 34: TYPE: CLOSED WHITE CROSS-HAIR EXIT
Page 35 and 36: 2. Highlight the ‘SET CROSS-HAIR
Page 37 and 38: 6. Adjusting the cross-hair size in
Page 39 and 40: 4. Highlight the ‘SET GAP’ sele
Page 41 and 42: 2. Highlight the ‘SET DISPLAY OPT
Page 43 and 44: 6. Adjusting the display position i
Page 45 and 46: 4. Highlight the ‘SET BACKGROUND
Page 47 and 48: 2. Highlight the ‘DATA LOG OPTION
Page 49 and 50: 6. Navigating the data log in the
Page 51 and 52: 4. Highlight the ‘CLEAR DATA LOG
Page 53 and 54: Once the data log has been cleared
Page 55 and 56: 4. Highlight the ‘DOWNLOAD DATA L
Page 57 and 58: Once the data log has been download
Page 59 and 60: 4. Highlight the ‘DCU STATUS’ s
Page 61 and 62:
SECTION 4 LASTEC CONCEPT DVD RECORD
Page 63 and 64:
1. Entering the DVD Menu by pressin
Page 65 and 66:
The Exit Option will always take th
Page 67 and 68:
If the disk is BLANK the following
Page 69 and 70:
If the correct disk has been loaded
Page 71 and 72:
6. Event marker. The Event marker s
Page 73 and 74:
The Operator now has two choices:-
Page 75 and 76:
Once the DVD disk is removed and th
Page 77 and 78:
AGAIN select the EXIT Option and th
Page 79 and 80:
Now select the REC Option and the f
show all

Operations Manual - Tele-Traffic

Create successful ePaper yourself

Delete template?

Save as template?