Operations Manual - Tele-Traffic

6. Adjusting the cross-hair size in the ‘SET GAP’ control function
Use the ‘Up Option’ to increment the cross-hair vertical gap size, use the ‘Down Option’ to
decrement the cross-hair vertical gap size, use the ‘Left Option’ to increment the cross-hair
horizontal gap size and use the ‘Right Option’ to decrement the cross-hair horizontal gap size. The
horizontal and vertical gap sizes are shown as values at the top of the screen.
The horizontal gap size can be any whole number between 000 and 255, and the vertical gap size
can be any whole number between 000 and 116. When the desired cross-hair gap size has been
chosen and is showing, press the ‘Enter Option’ to save the changes and return to the ‘SET
CROSS-HAIR’ menu.
Setting the display position
To set the display position, follow the steps below.
1. Enter the DCU menu by pressing the symbol on screen.
On entering the main menu, the following menu will be displayed.
SET LIMIT OPTIONS
SET USER NUMBER
SET TIME/DATE
SET CROSS-HAIR
SET DISPLAY OPTIONS
DATA LOG OPTIONS
SYSTEM OPTIONS
EXIT
EXIT
UP DOWN LEFT RIGHT ENTER
© Copyright – Tele-Traffic (UK) Limited 2007 39