Operations Manual - Tele-Traffic

More documents

Recommendations

Info

The below screen menu will then appear with a BLUE INSERT from the DVD recorder stating that its writing information to disk. N 18:25:15 48 AAAAAAAAAA R 03-08-04 REC EXIT If the REC Option is now pressed the above default information message will appear on screen. The system will not let the Operator proceed along this route. N 18:25:15 48 AAAAAAAAAA R 03-08-04 DISK ALREADY RECORDED ON GO TO MEDIA MENU TO REMOVE REC EXIT At this point the EXIT Option should be selected taking the Operator back to the below screen. N 18:25:15 48 AAAAAAAAAA R 03-08-04 REC MEDIA EXIT © Copyright – Tele-Traffic (UK) Limited 2007 71
The Operator now has two choices:- 1. If they wish to finalise the disk to END the enforcement session select the MEDIA Option. 2. To REVIEW the live video recording the Operator should select the EXIT Option. 8. Ending the Enforcement Session. In most cases this will be the default option and the operator will press the MEDIA Option. The below screen will then appear. N 18:25:15 48 AAAAAAAAAA R 03-08-04 EJECT LOAD EXIT Press the EJECT Option and the system will go into an AUTOMATIC FINALISATION sequence. This will finish the disk making it a W.O.R.M. disk allowing it to be used on PC’S and Laptops. The process may take several minutes and is governed by Panasonic drive. The Operator will be able to watch the process on screen. During the finalisation phase the on-screen Options of EJECT, LOAD & EXIT will not operate. © Copyright – Tele-Traffic (UK) Limited 2007 72
Page 1 and 2:
LTI 20.20 Laser Speed Measurement D
Page 3 and 4:
IMPORTANT! THESE INSTRUCTIONS SHOUL
Page 5 and 6:
Lastec Concept Component Parts. The
Page 7 and 8:
12. TAPELOGGER Here there is a chan
Page 9 and 10:
LASTEC CONCEPT SYSTEM APPLICATION H
Page 11 and 12:
SECTION 3 OPERATOR INSTRUCTIONS CON
Page 13 and 14:
ASSEMBLY PROCEDURE 1. Mount the LTI
Page 15 and 16:
ADJUSTING THE DISPLAY CONTROL UNIT
Page 17 and 18:
2. Highlight the ‘SET LIMIT OPTIO
Page 19 and 20:
6. Adjusting the speed limit in the
Page 21 and 22: 4. Highlight the ‘SET SPEED TIMEO
Page 23 and 24: 2. Highlight the ‘SET USER NUMBER
Page 25 and 26: 2. Highlight the ‘SET TIME/DATE
Page 27 and 28: 2. Highlight the ‘SET CROSS-HAIR
Page 29 and 30: 6. Adjusting the cross-hair positio
Page 31 and 32: 4. Highlight the ‘SET TYPE’ sel
Page 33 and 34: TYPE: CLOSED WHITE CROSS-HAIR EXIT
Page 35 and 36: 2. Highlight the ‘SET CROSS-HAIR
Page 37 and 38: 6. Adjusting the cross-hair size in
Page 39 and 40: 4. Highlight the ‘SET GAP’ sele
Page 41 and 42: 2. Highlight the ‘SET DISPLAY OPT
Page 43 and 44: 6. Adjusting the display position i
Page 45 and 46: 4. Highlight the ‘SET BACKGROUND
Page 47 and 48: 2. Highlight the ‘DATA LOG OPTION
Page 49 and 50: 6. Navigating the data log in the
Page 51 and 52: 4. Highlight the ‘CLEAR DATA LOG
Page 53 and 54: Once the data log has been cleared
Page 55 and 56: 4. Highlight the ‘DOWNLOAD DATA L
Page 57 and 58: Once the data log has been download
Page 59 and 60: 4. Highlight the ‘DCU STATUS’ s
Page 61 and 62: SECTION 4 LASTEC CONCEPT DVD RECORD
Page 63 and 64: 1. Entering the DVD Menu by pressin
Page 65 and 66: The Exit Option will always take th
Page 67 and 68: If the disk is BLANK the following
Page 69 and 70: If the correct disk has been loaded
Page 71: 6. Event marker. The Event marker s
Page 75 and 76: Once the DVD disk is removed and th
Page 77 and 78: AGAIN select the EXIT Option and th
Page 79 and 80: Now select the REC Option and the f
show all

Operations Manual - Tele-Traffic

Create successful ePaper yourself

Delete template?

Save as template?