Operations Manual - Tele-Traffic

ADJUSTING THE DISPLAY CONTROL UNIT
The LASTEC Concept is a DVD recoding system which captures text overlaid live video (via a 3
chip CCD camera), the system is controlled from a touch panel located over the viewing monitor at
the control end of the system.
The system is designed when powered up to run through a series of internal self checks which are
indicated on the viewing monitor should any fail.
When the unit is in user mode after passing its self checks the operator will navigate via the menu
system to the DCU (display control unit) and set required parameters e.g. date, time, user number,
site number and speed thresholds.
By pressing the DCU Option the user will gain access to the DCU setup controls, press ENTER
and this will give the user access to the DCU setup menu.
This menu is navigated by using the UP, DOWN, LEFT, RIGHT & ENTER on screen buttons.
Finally to exit this menu press the EXIT button to return to the DVD & DCU menu options.
This is a major change from the previous unit ALL controls are now accessed through an
on screen touch menu.
© Copyright – Tele-Traffic (UK) Limited 2007 14