Remeha Avanta Plus
Remeha Avanta Plus
Remeha Avanta Plus
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Remeha</strong> <strong>Avanta</strong> <strong>Plus</strong><br />
To be changed by installer only<br />
p 27<br />
p 28<br />
p 29<br />
p 30<br />
P 31<br />
p d f<br />
(p d U<br />
is shown<br />
later)<br />
Heat curve set point<br />
flow temperature<br />
Heat curve set point<br />
outside temperature (min)<br />
Heat curve set point<br />
outside temperature (max)<br />
Boiler type<br />
DHW control stop<br />
Restore factory settings<br />
0 - 60 °C 20<br />
0 - 30 °C 20<br />
-40 - 0 °C - 15**<br />
0 = combi<br />
1 = system<br />
0 - 20 °C 15<br />
On identification plate d f setting X<br />
is shown. Change parameter into X will<br />
restore the factory settings, see par. 2.9.10<br />
On identification plate d U setting Y<br />
is shown. Change parameter into Y will<br />
restore the factory settings, see par. 2.9.10<br />
0<br />
X<br />
Y<br />
table 09 Settings at service level<br />
1<br />
) Do not exceed this value<br />
* the system boiler in combination with an external calorifier will not warm up the calorifier in the Eco-mode.<br />
** minus character is not shown in display<br />
*** only change for propane firing<br />
Can also be changed by users<br />
Codes in display<br />
To be changed by installer only<br />
Description<br />
Setting range and notes where<br />
applicable<br />
Factory settings<br />
18s 24s 30s<br />
p 1 T set<br />
flow 20 - 85°C 75°C<br />
p 2 T set<br />
DHW 40 - 65°C 55°C<br />
p 3 Boiler regulation<br />
0 = CH off<br />
and DHW off<br />
1 = CH on<br />
and DHW on<br />
2 = CH on<br />
and DHW off<br />
3 = CH off<br />
and DHW on<br />
2<br />
p 4 Eco or comfort setting<br />
p 5 Anticipated current<br />
0 = comfort setting<br />
1 = eco mode*<br />
2 = regulated by controller<br />
0 = no anticipated current<br />
for thermostat on/off<br />
1 = anticipated current<br />
for thermostat on/off<br />
p 6 Display off automatically<br />
1 = display stays on<br />
2 = displaylight switches off automatically<br />
2<br />
0 = display stays off<br />
after 3 minutes<br />
p 17<br />
Maximum fan speed CH 10 – 70<br />
(natural gas)<br />
x 100 rpm<br />
35 1 ) 37 1 ) 52 1 )<br />
Maximum fan speed CH 10 – 70<br />
(propane)<br />
x 100 rpm<br />
33 1 ) 35 1 ) 50 1 )<br />
Maximum fan speed DHW<br />
(natural gas)<br />
Do not change *** 35 1 ) 43 1 ) 52 1 )<br />
p 18<br />
p 19<br />
Maximum fan speed DHW<br />
(propane)<br />
Minimum fan speed<br />
(CH and DHW)<br />
(natural gas)<br />
Minimum fan speed<br />
(CH and DHW)<br />
(propane)<br />
Adjustments for<br />
propane firing<br />
2<br />
0<br />
33 1 ) 41 1 ) 50 1 )<br />
Do not change *** 13<br />
Adjustments for<br />
propane firing<br />
20<br />
38
Change language