mdp control series - Omega Engineering
mdp control series - Omega Engineering
mdp control series - Omega Engineering
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Quick Jump<br />
What models and options are available?<br />
See page 3.<br />
Looking for detailed specifi cations?<br />
See page 3 & 4.<br />
Want to get started fast?<br />
See basic electrical hook-up details on page 8.<br />
See mechanical installation details on page 4 & 5.<br />
See some sample applications starting on page 24.<br />
Need Help?<br />
See troubleshooting on page 29.<br />
Warranty<br />
Dart Controls, Inc. (DCI) warrants its products to be free from defects in material and workmanship. The exclusive remedy<br />
for this warranty is DCI factory replacement of any part or parts of such product which shall within 12 months after delivery<br />
to the purchaser be returned to DCI factory with all transportation charges prepaid and which DCI determines to its satisfaction<br />
to be defective. This warranty shall not extend to defects in assembly by other than DCI or to any article which has<br />
been repaired or altered by other than DCI or to any article which DCI determines has been subjected to improper use. DCI<br />
assumes no responsibility for the design characteristics of any unit or its operation in any circuit or assembly. This warranty is<br />
in lieu of all other warranties, express or implied; all other liabilities or obligations on the part of DCI, including consequential<br />
damages, are hereby expressly excluded.<br />
NOTE: Carefully check the <strong>control</strong> for shipping damage. Report any damage to the carrier immediately. Do not attempt to<br />
operate the drive if visible damage is evident to either the circuit or to the electronic components.<br />
All information contained in this manual is intended to be correct, however information and data in this manual are subject<br />
to change without notice. DCI makes no warranty of any kind with regard to this information or data. Further, DCI is not<br />
responsible for any omissions or errors or consequential damage caused by the user of the product. DCI reserves the right<br />
to make manufacturing changes which may not be included in this manual.<br />
WARNING<br />
Improper installation or operation of this <strong>control</strong> may cause injury to personnel or <strong>control</strong> failure. The <strong>control</strong> must<br />
be installed in accordance with local, state, and national safety codes. Make certain that the power supply is disconnected<br />
before attempting to service or remove any components!!! If the power disconnect point is out of sight,<br />
lock it in disconnected position and tag to prevent unexpected application of power. Only a qualifi ed electrician or<br />
service personnel should perform any electrical troubleshooting or maintenance. At no time should circuit continuity<br />
be checked by shorting terminals with a screwdriver or other metal device.