simatic s7-400 - Teknika Otomasyon

SIMATIC S7-400
Communication
© Siemens AG 2008
5
CP 443-5 Basic
■ Overview
• Connection of the S7-400 to PROFIBUS
• Communication services:
- PG/OP communication
- S7 communication
- Open communication (SEND/RECEIVE)
- PROFIBUS FMS
• Time synchronization
• Easy programming and configuration over PROFIBUS
• Cross-network programming device communication through
S7 routing
• Can be easily integrated into the SIMATIC S7-400 system
• Modules can be replaced without the need for a PG
• SIMATIC H system operation for redundant S7 communication
■ Technical specifications
Order No.
6GK7 443-5FX02-0XE0
Product type description CP 443-5 BASIC
Transfer rate
Transmission rate at Interface 1
• Minimum
9.6 kbit/s
• Maximum
12 Mbit/s
Interfaces
Version of electrical connection of 9-pin Sub-D socket (RS 485)
the PROFIBUS interface
Supply voltage
Type of supply voltage
DC
Supply voltage
5V
Relative symmetrical tolerance at 5%
5 V DC
Current consumption
Current consumed from backplane 1.2 A
bus at 5 V DC, typical
Effective power loss
Effective power loss
6.5 W
Permitted ambient conditions
Ambient temperature
• during operation 0 … +60 °C
• during storage -40 … +70 °C
• during transport -40 … +70 °C
Maximum relative humidity at 95%
25 °C during operation
Order No.
Product type description
Design, dimensions and weight
Module format
• Width
•Height
•Depth
Net weight
Performance data
FMS function
Number of possible connections in
the case of FMS connection, max.
Data volume of the variables
• for READ job, max.
• for WRITE job, max.
Number of variables
• Configurable from server to
FMS partner
• Loadable from server to
FMS partner
S7 communication
6GK7 443-5FX02-0XE0
CP 443-5 BASIC
S7-400 compact module,
single width
25 mm
290 mm
210 mm
700 g
48
237 byte
233 byte
512
2640
Number of possible connections for 48
S7 communication, max. 1)
1) depending on the CPU type
5/108 Siemens ST 70 · 2009