simatic s7-400 - Teknika Otomasyon

More documents

Recommendations

Info

SIMATIC S7-<strong>400</strong> Central processing units © Siemens AG 2008 5 CPU 417 ■ Technical specifications (continued) S7 times • Number 2 048 6ES7 417-4XT05-0AB0 • Remanence - adjustable Yes - lower limit 0 - upper limit 2 047 - preset No times retentive • Time range - lower limit 10 ms - upper limit 9 990 s IEC timer • present • Type Data areas and their remanence remanent data area, total Yes SFB Total working and load memory (with backup battery) Flag • Number, max. 16 Kibyte • Remanence available Yes • Number of clock memories 8; (in 1 memory byte) Address area I/O address area • Inputs 16 Kibyte •Outputs 16 Kibyte • of which, distributed - MPI/DPinterface, inputs 2 Kibyte - MPI/DP interface, outputs 2 Kibyte - DP interface, inputs 8 Kibyte - DP interface, outputs 8 Kibyte Process image • Inputs, adjustable 16 Kibyte • Outputs, adjustable 16 Kibyte • Inputs, preset 1 024 byte • Outputs, preset 1 024 byte • consistent data, max. 244 byte • Access to consistent data in Yes process image Subprocess images • Number of subprocess 15 images, max. Digital channels • Inputs 131 072 •Outputs 131 072 • Inputs, of which central 131 072 • Outputs, of which central 131 072 Analog channels • Inputs 8 192 •Outputs 8 192 • Inputs, of which central 8 192 • Outputs, of which central 8 192 6ES7 417-4XT05-0AB0 Hardware config. connectable OPs 63 Central devices, max. 1 Expansion devices, max. 21 Multicomputing Yes; Max. 4 CPUs (with UR1 or UR2) IM • Number of connectable IMs 6 (total), max. • Number of connectable 6 IM 460s, max. • Number of connectable 4; IM 463-2 IM 463s, max. Number of DP masters • integrated 2 • via IM 467 4 •via CP 10; CP 443-5 Extended • Mixed mode IM + CP permitted No; IM 467 cannot be used with CP 443-5 Ext.; IM 467 cannot be used with CP 443-1 EX40 in PN IO mode • via interface module 2 • Number of pluggable S5 6 modules (via adapter capsule in central device), max. Number of IO controllers •via CP 4; Via CP 443-1 EX 41 in PN mode; max. 4 in central controller Number of operable FMs and CPs (recommended) •FM Limited due to number of slots and number of connections • CP, point-to-point Limited due to number of slots and number of connections • PROFIBUS and Ethernet CPs 14; Of which 10 CP or IM max. as DP master and PN controller Time Clock • Hardware clock Yes (real-time clock) • buffered and synchronizable Yes • Resolution 1ms Operating hours counter •Number 8 Clock synchronization •supports Yes • to MPI, Master Yes • to MPI, Slave Yes • to DP, Master Yes • to DP, Slave Yes • in AS, Master Yes • in AS, Slave Yes • on Ethernet via NTP Via CP • to IF 964 DP Yes 5/34 Siemens ST 70 · 2009
© Siemens AG 2008 SIMATIC S7-<strong>400</strong> Central processing units CPU 417 ■ Technical specifications (continued) S7 message functions Number of login stations for message functions, max. Symbol-related messages Number of messages • overall, max. 1 024 Block related messages Yes Alarm 8-blocks Yes Instrumentation & control Yes messages 6ES7 417-4XT05-0AB0 63; Max. 63 with ALARM_S and ALARM_D (OPs); max. 16 with ALARM_8 and ALARM_P (e.g. WinCC) Yes Test commissioning functions Status/control • Status/control variable Yes Forcing • Forcing Yes Status block Yes Single step Yes Number of breakpoints 4 Diagnostic buffer • present Yes • Number of entries, max. 3 200 • adjustable Yes • preset 120 Communication functions PG/OP communication Yes Routing Yes Global data communication • supported Yes • Size of GD packets, max. 54 byte S7 basic communication • supported Yes • Useful data per job, max. 76 byte S7 communication • supported Yes • Useful data per job, max. 64 Kibyte S5-compatible communication • supported Yes; (via CP max. 10 and FC AG_SEND and FC AG_RECV) • Useful data per job, max. 8 Kibyte Standard communication (FMS) • supported Yes; Via CP and loadable FB • Web server No; Via CP • ISO-on-TCP (RFC1006) Via CP 443-1 Adv. and loadable FB - Data length, max. 1452 Number of connections • overall 64 6ES7 417-4XT05-0AB0 1st interface Physics RS 485 / PROFIBUS isolated Yes Functionality •MPI Yes •DP master Yes •DP slave Yes MPI • Number of connections 44 • Services - PG/OP communication Yes - Routing Yes - Global data communication Yes - S7 basic communication Yes - S7 communication Yes • Transmission speeds, max. 12 MBit/s DP master • Number of connections, max. 32 • Services - PG/OP communication Yes - Routing Yes - Global data communication No - S7 basic communication Yes - S7 communication Yes - equidistance support Yes - Activation/deactivation of Yes DP slaves - direct data exchange Yes (cross traffic) • Transmission speeds, max. 12 MBit/s • Number of DP slaves, max. 32 • Address area - Inputs, max. 2 Kibyte - Outputs, max. 2 Kibyte • Useful data per DP slave - Inputs, max. 244 byte - Outputs, max. 244 byte DP slave • Number of connections 32 • Services - PG/OP communication Yes - Routing Yes • Transmission speeds, max. 12 MBit/s • Transfer memory - Inputs 244 byte -Outputs 244 byte • Address area, max. 32 • Useful data per address area, 32 byte max. • Useful data per address area, 32 byte of which consistent, max. 5 Siemens ST 70 · 2009 5/35
Page 1 and 2: © Siemens AG 2008 SIMATIC S7-400 5
Page 3 and 4: © Siemens AG 2008 SIMATIC S7-400 I
Page 5 and 6: © Siemens AG 2008 SIMATIC S7-400 C
Page 33: © Siemens AG 2008 SIMATIC S7-400 C
Page 59 and 60: © Siemens AG 2008 SIMATIC S7-400 S
Page 63 and 64: © Siemens AG 2008 SIMATIC S7-400 D
Page 71 and 72: © Siemens AG 2008 SIMATIC S7-400 A
Page 83 and 84: © Siemens AG 2008 SIMATIC S7-400 F
Page 85 and 86:
© Siemens AG 2008 SIMATIC S7-400 F
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
© Siemens AG 2008 SIMATIC S7-400 C
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
© Siemens AG 2008 SIMATIC S7-400 M
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
© Siemens AG 2008 SIMATIC S7-400 R
Page 141 and 142:
© Siemens AG 2008 SIMATIC S7-400 R
Page 143 and 144:
© Siemens AG 2008 SIMATIC S7-400 I
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
© Siemens AG 2008 SIMATIC S7-400 P
Page 153 and 154:
© Siemens AG 2008 SIMATIC S7-400 P
Page 155 and 156:
© Siemens AG 2008 SIMATIC S7-400 A
show all

simatic s7-400 - Teknika Otomasyon

Create successful ePaper yourself

Delete template?

Save as template?