Hydro-Gear ZT-5400 transaxles manual - BIBUS France
Hydro-Gear ZT-5400 transaxles manual - BIBUS France
Hydro-Gear ZT-5400 transaxles manual - BIBUS France
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MOTOR CYLINDER BLOCK, OPTIONAL 2-SPEED SHAFT &<br />
SWASHPLATE<br />
Refer to Figure 24<br />
Disassembly<br />
1. Remove all external items previously discussed<br />
in their recommended order.<br />
2. Disassemble the motor block assembly and<br />
inspect all parts.<br />
3. Remove the thrust bearing (80) and<br />
swashplate (160) from the main housing.<br />
Two Speed Model(Optional)<br />
4. Remove the cam (161) and the 2-speed<br />
shaft (162).<br />
Inspection<br />
1. Inspect the races of the thrust bearing (80)<br />
for wear or damage.<br />
2. Inspect the pistons (81), washers (82) and<br />
the motor cylinder block (84) of the motor<br />
block assembly for scratches and or wear.<br />
Replace the motor block assembly if necessary.<br />
Assembly<br />
1. Reassemble all parts in the reverse order<br />
of disassembly.<br />
2. Apply a light coating of oil to all running<br />
surfaces.<br />
3. Reassemble the items of the motor block<br />
assembly. Place the thrust bearing assembly<br />
(80) so the thick race contacts<br />
the motor block pistons.<br />
160<br />
80<br />
162<br />
161<br />
81<br />
82<br />
83<br />
84<br />
Figure 24, Motor Cylinder Block Assembly<br />
<strong>ZT</strong>-<strong>5400</strong> Powertrain 31
Change language