Hydro-Gear ZT-5400 transaxles manual - BIBUS France
Hydro-Gear ZT-5400 transaxles manual - BIBUS France
Hydro-Gear ZT-5400 transaxles manual - BIBUS France
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CENTER SECTION AND MAGNET<br />
Refer to Figure 25<br />
Disassembly<br />
1. Remove all items previously discussed, in<br />
their recommended order.<br />
2. Pry off the charge galley cap (25).<br />
NOTE: Mark orientation of the shock valves<br />
before removing.<br />
Assembly<br />
1. Assemble items in reverse order of disassembly.<br />
2. When tightening components refer to the<br />
table on page 15 for the required torque<br />
values.<br />
3. Remove the shock valve seats (26).<br />
4. Remove the shock valves (28/29), the<br />
springs (32) and the check spring retainers<br />
(30).<br />
5. Remove the charge pressure relief plug<br />
(36), the spring (35) and the ball (34).<br />
Inspection<br />
1. Inspect the all items of the charge galley<br />
assembly for wear or damage. Replace if<br />
necessary.<br />
2. Clean off the magnet (39).<br />
36<br />
35<br />
34<br />
20<br />
30<br />
28<br />
32<br />
39<br />
25<br />
26<br />
32<br />
30<br />
40<br />
29<br />
26<br />
Figure 25, Charge Galley Assembly and Magnet<br />
32 <strong>ZT</strong>-<strong>5400</strong> Powertrain