condair sH2
condair sH2
condair sH2
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
29<br />
H<br />
H<br />
H<br />
6. Fix one mounting bracket “H” to each vertical support and intermediate support using a hexagon<br />
socket screw M6x12, a nut M6 and a washer (see figure above). Important: With multiple intermediate<br />
supports all mounting brackets must be mounted to the supports on the same side. The<br />
mounting brackets fixed to the outermost supports must be mounted always outside (between<br />
duct wall and support) and point inward.<br />
Finally align the supports, then fix the mounting brackets to the duct ceiling using two self-tapping<br />
screws 5.5x19 each.
Change language