condair sH2
condair sH2
condair sH2
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
53<br />
6.4 Dismantling and installation works<br />
6.4.1 Dismantle and install the mist eliminator and humidification boxes<br />
1. Undo the hose clamps, then pull off the hoses from<br />
the connections on the trickling hoods.<br />
2. Lift the trickling hoods on the water connection side<br />
and remove them to the front.<br />
3. Starting from the top remove the mist eliminator boxes<br />
(push box upwards and remove it to the front).<br />
4. Release the fixing clip in the middle of the mounting<br />
bracket by pressing slightly on the vertical support,<br />
then carefully push the mounting bracket upwards<br />
and remove it. Repeat this step for all mounting<br />
brackets.<br />
5. Starting from the top remove the humidification boxes<br />
(push box upwards and remove it to the front).<br />
The installation of the cleaned or the new humidification boxes/mist eliminator boxes follows the<br />
reverse dismantling order.