AP2257 - Draft A1 - Machined Part Modelling for CATIA V5
AP2257 - Draft A1 - Machined Part Modelling for CATIA V5
AP2257 - Draft A1 - Machined Part Modelling for CATIA V5
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
AIRBUS<br />
<strong>Machined</strong> <strong>Part</strong> <strong>Modelling</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong><br />
<strong>AP2257</strong><br />
Step 8:<br />
5 Axis Pockets 1, 2, 3 & 4 creation:<br />
- Create one body <strong>for</strong> each 5 axis pocket<br />
- Create one sketch <strong>for</strong> each 5 axis pocket<br />
• Create the cutting tool contour inside the different sketch (see paragraph 4.1.2 &<br />
4.2.2)<br />
- Create the different solid resulting from the cutting tool trajectory with slot features<br />
5 Axis Pocket 2<br />
5 Axis Pocket Solid<br />
- Assembly the different bodies with <strong>Part</strong> Body<br />
5 Axis Pocket 4<br />
5 Axis Pocket 1<br />
5 Axis Pocket 3<br />
5 Axis Pocket 2<br />
5 Axis Pockets Assembled<br />
Issue:<strong>Draft</strong> <strong>A1</strong> Date: 13 February 2002 Page 13 of 46
Change language