AP2257 - Draft A1 - Machined Part Modelling for CATIA V5
AP2257 - Draft A1 - Machined Part Modelling for CATIA V5
AP2257 - Draft A1 - Machined Part Modelling for CATIA V5
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
AIRBUS<br />
<strong>Machined</strong> <strong>Part</strong> <strong>Modelling</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong><br />
<strong>AP2257</strong><br />
Step 4: Sculpture (split function,<br />
CAT<strong>Part</strong>.<br />
) the solid by the two surfaces referenced in the<br />
Splitting of part body by external surfaces<br />
Step 5: Creation of 2.5 axis pockets in "Multi-Body" approach<br />
- Creation of the contours of the 2.5 axis pocket.<br />
• Create in separate sketches but position on the reference planes the 3 sketches<br />
of the 3 pockets<br />
- Creation with 3 separate pocket features, , 3 elementary pockets<br />
<strong>Part</strong>Body<br />
Body containing the<br />
2.5 axis pockets<br />
Pockets 0.x Definition<br />
Issue:<strong>Draft</strong> <strong>A1</strong> Date: 13 February 2002 Page 9 of 46
Change language