AP2257 - Draft A1 - Machined Part Modelling for CATIA V5
AP2257 - Draft A1 - Machined Part Modelling for CATIA V5
AP2257 - Draft A1 - Machined Part Modelling for CATIA V5
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
AIRBUS<br />
<strong>Machined</strong> <strong>Part</strong> <strong>Modelling</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong><br />
<strong>AP2257</strong><br />
Step 12:<br />
Adding the 2.5 axis large pocket.<br />
- Creation of a separate body<br />
- Pocket sketch creation using 3D definition<br />
Sketch Plan :<br />
Z=4mm<br />
Coincidence<br />
constraint<br />
between a 3D<br />
edge and a sketch<br />
line<br />
Sketch of Large Pocket<br />
Issue:<strong>Draft</strong> <strong>A1</strong> Date: 13 February 2002 Page 17 of 46