AP2257 - Draft A1 - Machined Part Modelling for CATIA V5
AP2257 - Draft A1 - Machined Part Modelling for CATIA V5
AP2257 - Draft A1 - Machined Part Modelling for CATIA V5
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
AIRBUS<br />
<strong>Machined</strong> <strong>Part</strong> <strong>Modelling</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong><br />
<strong>AP2257</strong><br />
• Creation of fillet radii on the walls and bottoms of the pockets (multi-body<br />
approach: see Step 5)<br />
• Create the various fillet radii.<br />
R=11 mm<br />
R=20 mm<br />
R= 4 mm (bottom of<br />
pocket)<br />
2.5 axis pockets with fillets<br />
• Assemble the pocket with the <strong>Part</strong>Body.<br />
Issue:<strong>Draft</strong> <strong>A1</strong> Date: 13 February 2002 Page 23 of 46
Change language