powec as - Armspower.com

powec as
Product description communication
Dok.nr.:UK\PD\ZU\PowCom
Rev.: F
program - PowCom Page 10 of 27
Prepared: Arild Sagebø Date: 08.03.2000
spelling. The password can contain all kind of letters and numbers, and the
system will distinguish between small and capital letters.
10.3. Edit the Telnet List
To edit the telnet list, select a line and press CHANGE. There will always be
one free line at the bottom of the list, enabling the user to add new numbers by
using this line.
To delete a line in the telnet list, select a line and press DELETE.
To change telnet list, press NEW TELNET LIST and select a file. If a file name
which does not exist is entered, a new list will be created.
10.4. Telnet Init String
The telnet init string is a string that is sent to the telnet device when the
connection is made. This string has to contain the correct commands to set the
telnet device up to port all data to an RS232 serial port. The commands
available are:
{text} Makes the init sequence wait until "text" is received from the telnet
device
\e Inserts an escape character (Chr(27))
\r Inserts a carriage return character (Chr(13))
\l Inserts a line feed character (Chr(10))
, Sends the string preceding the comma
\f Turns off doubling of Char(255)
10.5. Init String Example
The init string for SNMP Link SL60 should look something like this:
\e\e\e{Exit}1{password}ACCESS1\r\l