powec as - Armspower.com

More documents

Recommendations

Info

powec as Product description communication Dok.nr.:UK\PD\ZU\PowCom Rev.: F program - PowCom Page 20 of 27 Prepared: Arild Sagebø Date: 08.03.2000 21. Change password First enter your old password and press OK. If this is correct, you can enter your new password. Finally you will have to repeat your new password to avoid mistakes. 22. Alarm history This windows shows a list of the last (up to) 40 alarms. By selecting a certain time in the list, the alarms that where active at that time are shown together with what change of alarm status occurred. 23. Alarms/information The list shows all alarms that are active at the moment.
powec as Product description communication Dok.nr.:UK\PD\ZU\PowCom Rev.: F program - PowCom Page 21 of 27 Prepared: Arild Sagebø Date: 08.03.2000 24. Module data This window shows data about the active module. The layout of this window depends on the connected system. However, a scrollbar will always be displayed in the upper part of the window. This scrollbar is used to select the module. The number at the right side of the scrollbar, shows the selected module. The number which is stated as module no. (below the scrollbar) shows the module for which the data is displayed. If you select another module with the scrollbar, the data for this module will be displayed after approximately 1 second. 25. Alarm dial back If needed the PCU/PCS can be set up to dial back to a certain number in case of an alarm. Tick off the alarms that should trigger a dial back. Enter the phone number, and enable dial back. Dial back require a modem connected to the PCU/PCS. Three modes of dial back is available. Server on change, is used
Page 1 and 2: powec as Product description commun
Page 19: powec as Product description commun
Page 29 and 30: powec as Technical Specification Do
Page 31 and 32: powec as Technical Specification Do

powec as - Armspower.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?