Ascent 450 BL Park Glider PNP - E-flite
Ascent 450 BL Park Glider PNP - E-flite
Ascent 450 BL Park Glider PNP - E-flite
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Wing Assembly<br />
Required Parts<br />
Fuselage<br />
Wing panel (right and left)<br />
Aluminum wing tube #4 washer (2)<br />
4-40 x 1/2-inch socket head screw (2)<br />
Required Tools and Adhesives<br />
Ball driver: 3/32-inch<br />
<br />
1. Locate the aluminum wing tube and slide it into the<br />
hole in the wing root of one of the wing panels. The tube<br />
will slide in roughly half of its length.<br />
<br />
2. Slide the remaining wing panel onto the tube. The two<br />
wing panels will fit tightly together.<br />
<br />
3. Slide the dowels at the leading edge into the holes in<br />
the fuselage as shown.<br />
E-<strong>flite</strong> <strong>Ascent</strong> <strong>PNP</strong> Assembly Manual<br />
7