Ascent 450 BL Park Glider PNP - E-flite
Ascent 450 BL Park Glider PNP - E-flite
Ascent 450 BL Park Glider PNP - E-flite
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2. Mark the center of the tail boom inside the boom using<br />
a felt-tipped pen.<br />
<br />
4. With the wing mounted to the fuselage, use a long<br />
ruler to measure the distance from the wing tip to the<br />
stabilizer tip as shown in the drawing. Carefully adjust<br />
the stabilizer until both measurements are equal.<br />
a<br />
a<br />
<br />
3. Use painter's tape to secure the stabilizer to<br />
the fuselage.<br />
E-<strong>flite</strong> <strong>Ascent</strong> <strong>PNP</strong> Assembly Manual<br />
9