ATMOS S 61 Servant ENT workstation (GA-en) - This is the ATMOS ...
ATMOS S 61 Servant ENT workstation (GA-en) - This is the ATMOS ...
ATMOS S 61 Servant ENT workstation (GA-en) - This is the ATMOS ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.0 Operation<br />
4.1 On / off switch<br />
With <strong>en</strong>gaging <strong>the</strong> main switch all integrated<br />
and connected devices are ready.<br />
4.2 Suction system<br />
!<br />
Never drive <strong>the</strong> suction system without bacterial fi lter! Always use <strong>the</strong> splash guard for ext<strong>en</strong>tion of <strong>the</strong> utilization of <strong>the</strong><br />
bacterial fi lter. Incorrect using makes expire <strong>the</strong> guaranty!<br />
Change <strong>the</strong> bacterial fi lter regularly. Advices in section 5.0!<br />
The hose attachm<strong>en</strong>t must be exchanged after each pati<strong>en</strong>t.<br />
4.2.1 Control and d<strong>is</strong>play of <strong>the</strong> suction rate<br />
Adjustm<strong>en</strong>t<br />
vacuum<br />
D<strong>is</strong>play<br />
vacuum<br />
For activation of <strong>the</strong> suction system you have following alternatives:<br />
A)<br />
If you do not have a foot switch connected:<br />
Take handle from holder. By <strong>the</strong> installed light barrier <strong>the</strong> suction system activates automatically.<br />
Set <strong>the</strong> desired vacuum via adjustm<strong>en</strong>t, <strong>the</strong>refor <strong>the</strong> <strong>en</strong>d of <strong>the</strong> suction hose has to be closed. Only in th<strong>is</strong> case a vacuum will<br />
be built up.<br />
4.2.2 Foot switch (530.1080.0)<br />
B)<br />
If you have a foot switch connected:<br />
Take handle from holder. Afterwards push and hold <strong>the</strong> foot switch for activation. Wh<strong>en</strong> releasing, <strong>the</strong> suction system<br />
deactivates again.<br />
Set <strong>the</strong> desired vacuum via adjustm<strong>en</strong>t. Therefor <strong>the</strong> <strong>en</strong>d of <strong>the</strong> suction hose has to be closed. Only in th<strong>is</strong> case a vacuum<br />
will be built up.<br />
4.2.3 Hose rinsing system<br />
at least 30 sec.<br />
After each application rinse <strong>the</strong> suction hose thoroughly. Add <strong>the</strong> suction hose (without canula) with <strong>the</strong> suction nipple to<br />
<strong>the</strong> suction attachm<strong>en</strong>t for <strong>the</strong> hose rinsing and soak up <strong>the</strong> rinsing fl uid at least 30 sec.<br />
13