ATMOS S 61 Servant ENT workstation (GA-en) - This is the ATMOS ...

4.0 Operation
4.5 Ear rinsing module 37 °C basic
When switching on the unit, the quivers for the ear rinsing system will be
activated and heated up to 37°C.
Only use antibacterial rinsing fluid for rinsing the auditory channel.
The temperature of the rinsing fl uid has to be checked with a thermometer before using.
It must be 37°C ± 2°C, otherwise the patient may feel dizzy or can collapse.
The vacuum gauge may indicate max. -0.4 bar at closed opening on . It has to be checked before each
application on the patient.
To avoid awkward and loud side-air-tones, the application part `rinsing peak` has to be held close to the
acoustic meatus.
Rinsing fl uid, which is no longer in use, has to be disposed at the end of the practice business.
• The rinsing bottle will be fi lled with warm rinsing fl uid
(37°C ± 2°C). The rinsing lid with the hose will be
screwed onto the bottle and slightly tightened.
• Via thermometer the temperature can be monitored.
• The tender peak will be attached onto the cylindric
attempt at the rinsing lid as far as it will go
• Connect the suction hose with the vacuum port of the
ear rinsing system. Set suction system on maximum
vacuum.
• Now the ear rinsing system with the tender peak is
putted into the acoustic meatus. Keep the side-air opening
closed with your fi nger. As long as the side-air opening
is open, it will be rinsed.
Ear rinsing system
tender peak for rinsing
side-air aperture
vacuum port on system
rinsing lid (complete)
rinsing bottle
safety aperture
19