ATMOS S 61 Servant ENT workstation (GA-en) - This is the ATMOS ...

4.0 Operation
4.9 Clipboard endoscopy
Integration of 3-channel endoscope management for rigid and
flexible endoscopes.
4.9.1 Option LED Light Cube
The LED Light Cube is automatically activated when switching
on the unit.
With a simple rotary motion the adapters are screwed in up to
the stop position and fixed in the Clipboard. The light conductors
can be plugged in the connection. The light channel is
automatically activated when the light conductor is removed
from the support. Manual on and off switching of the light
channels by means of the keypad is also possible.
Screwing in the adapter
4.9.2 Option endoscope management (heated)
Endoscope heating is activated automatically when the unit is
switched on. The quivers are heated to 41°C.
Clipboard with connected light
conductors
Operating the keypad
4.9.3 Hook for the headlamp with automatic
switching
Headlight can easily be removed and put back during the
examination. Connect the headlamp to the clipboard as
described in chapter 4.9.1. Hereto please use the right light
channel. This light channel is then automatically activated if
the headlight is removed from the hook.
In order to guarantee error-free operation, please seal the
light barrier of the right light channel with the provided blind
plug.
Clipboard with connected headlight
23