FALCOM JP18 GPS receiver - Hardware manual

More documents

Recommendations

Info

JP18 FALCOM GPS RECEIVER VERSION 1.0.7 4 TECHNICAL DATA 4.1 FEATURES � GPS: � Size: � Weight: � TCXO: � On-Chip Memory: � OEM single board 20 channel GPS receiver. � 11 x 11 x 1.7 mm (L x B x H) � 0.5 gr � Operating Voltage: � Power Consumption: � Power Management: � Temperature Range: � ROM Operation: � FLASH Operation: � BOOTMODE: � ± 0.5 ppm � FLASH 4 Mbit � ROM 4 Mbit � +3.3 V ... + 5.5 V DC � approx. 27 mA (continuous mode) � 25 µA (Hibernate state) � Adaptive TricklePower (ATP) - for more details see chapter 5.5.1, page 16. � -20 to +70 °C (operation, transportation and storage). � Baudrate: 4800 bps, � Messages: (1x1 sec.)RMC, GGA, GSA; (1x5sec.) GSV -(1 x 5 sec.) � Baudrate: 38400 bps, � Messages: RMC, GGA, GSA, GSV - (1 x 1 sec.) This confidential document is the property of FALCOM and may not be copied or circulated without permission. Page 10
JP18 FALCOM GPS RECEIVER VERSION 1.0.7 � To load a new firmware into the internal FLASH use SiRFflash tool version 3.2 or higher. This confidential document is the property of FALCOM and may not be copied or circulated without permission. Page 11
Page 1 and 2: THIS DOCUMENT IS AVAILABLE AT HTTP:
Page 3 and 4: JP18 FALCOM GPS RECEIVER VERSION 1.
Page 9: JP18 FALCOM GPS RECEIVER VERSION 1.

FALCOM JP18 GPS receiver - Hardware manual

Create successful ePaper yourself

Delete template?

Save as template?