4 - HUBER

1. Safety
1.2. Intended Use
General Safety Instructions
Duties of the Plant Operator:
The operating instructions must be kept readily available in the
immediate vicinity of the thermostat.
Only sufficiently qualified operating personnel are permitted to use
the thermostat.
The operating personnel must be trained in handling and using the
thermostat.
Verify that operating personnel have read and understood the operating
instructions.
Precisely define the fields of responsibility of the operating personnel.
Provide protective clothing for the operating personnel.
Requirements to be Met by the Operating Personnel
Only personnel assigned and trained by the plant operator may
handle and operate the thermostat.
The minimum age for operating personnel is 16 years.
Within the workspace, the device operator is responsible for third
parties.
Duties of the Operatorating Personnel:
The operating personnel must read the operating instructions thoroughly
before handling or using the thermostat.
The operating personnel must heed all the safety instructions.
The operating personnel must wear protective clothing when handling or
using the thermostat.
Workspace
The workspace is defined to be at the control panel in front of the
thermostat.
The workspace is further defined by the peripheral equipment
connected by the customer. The customer is responsible for taking
suitable safety measures.
Safety Devices
Over-temperature protection device
Low liquid level protection
Mains failure automatic
Alarm functions
Emergency Plan – Switch off the Power Supply!
Hazardous emission of fluid/vapor from the thermostat or connected
pipes/hoses (very hot, very cold, hazardous chemical compositions) and
or fire/explosion/implosion:
Strictly heed the safety instructions of the plant operator relating to the
risk of injury and danger to life as well as to the limitation of damage.
Observe the instructions included in the safety data sheet of the
11-2