4 - HUBER
4 - HUBER
4 - HUBER
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Contents<br />
The following six chapters must be read and understood before<br />
commissioning and operating your unit. They contain important functional,<br />
operational and safety information. Failure to follow the contained instructions<br />
will invalidate the warranty.<br />
Symbols<br />
Preface<br />
1. Safety Instruction<br />
1.1. Intended Use 11-1-2<br />
General Safety Instructions<br />
11-1<br />
12-1<br />
2. Device Description<br />
2.1. Structure 21-1-5<br />
2.2. Controller, Remote Control 22-1<br />
3. Commissioning<br />
3.1. Safety Instructions and Principles 31-1-4<br />
3.2. Connecting Main Power and Media 32-1-3<br />
3.3. Filling Thermofluid 33-1-4<br />
3.4. Major Pre-settings 34-1<br />
4. Thermoregulation via Controller<br />
4.1. Safety Instructions and Principles 41-1-2<br />
4.2. Main Menu 42-1<br />
4.3. Editing Default Settings 43-1-10<br />
4.4. Limiting the Thermoregulation Range 44-1<br />
4.5. Calibration 45-1-2<br />
4.6. Utilities 46-1<br />
4.7. Enter a Setpoint-Start 47-1<br />
4.8. Convenient Thermoregulation - Programs 48-1-6<br />
4.9. Terminating the Thermoregulation Process 49-1<br />
5. Shut Down<br />
5.1. Safety Instructions and Principles 51-1<br />
5.2. Draining, Deactivating and Dismantling 52-1<br />
5.3. Maintenance and Service 53-1-2<br />
6. Appendix<br />
6.1. Presettings 61-1<br />
6.2. Interface specification, Data 62-1<br />
6.3. Device Messages 63-1-4<br />
6.4. Huber Glossary 64-1-8<br />
Attached<br />
Technical data<br />
Spare Parts