DUPLO CORPORATION System 4000 DYNAMIC ... - Godar Machinery

6. Stitching Normal Size Paper
8) • After completing fine adjustments of the folding
area, press the bm Step Mode Key.
32
• The paper will be ejected folded, and the bu Step
Mode Folding Area Lamp and the bp Back Stopper
Lamp will go off, and the bs Input Memory Lamp
will light up.
9) • To store the fine adjustment data, press the bt Input
Memory Key.
• If the data need not be stored, press the 8 Clear
Key. The bs Input Memory Lamp will go off.
Note
The bt Input Memory Key is effective only while the
bs Input Memory Lamp is lit. Once it is pressed, data
will be stored in the memory displayed on the LCD
(overwritten) and the bs Input Memory Lamp will go
off.
To check paper alignment at the folding
area in the step mode
1) Press the bm Step Mode Key once. ( 9 blinks.)
2) Press the bm Step Mode Key another time. (The
conveyance system operates.)
3) Press the bm Step Mode Key while pressing the 5 Shift Key.
The back stopper operates to align the paper.
4) Return to step 7) in 6-4.
To check paper alignment at the stitching
area in the step mode
1) Press the bm Step Mode Key once. ( 9 blinks.)
2) Press the bm Step Mode Key another time. (The
conveyance system operates.)
3) Press the bm Step Mode Key another time. The back
stopper and side joggers operate to align the paper.
4) Return to step 3) in 6-4.
Note
To stop the step mode halfway through, press the 8 Clear
Key.
6-5. Other Functions
F
2 3 C
5 6 0
8 9
8
5 8
0
C
bs
bm
bt
9
bm