DUPLO CORPORATION System 4000 DYNAMIC ... - Godar Machinery

8. Numerically Inputting the Paper Size
1) • Since paper size is input using numerals, measure the paper size on the scale.
For example, L=8.27 inch, W=11.69 inch.
2) • Select the number of the desired size to overwrite according to the previous section “Selecting the Memory Number”.
For example, when 7 is selected, and the LCD displays [*7. ##.##x##.##].
(The LCD blinks.)
3) • When the 6 Change Key is pressed, the LCD displays [*7. L=##.##].
• Select the desired processing method.
4) • Press the bk Stitch Key and select side-stitching.
5) • Press the bl Fold Key and select no-folding.
6) • Input the length of the paper [L] as shown below.
• Using the 7 Numerical Keys, input four digits.
44
Example)
Press the 7 Numerical Keys in the following order.
However, input a value (L) between 7.88 and 9.49 inch.
Note
To clear the input number to 0, press the 8 Clear Key.
7) • When the 9 Set Key is pressed, the LCD displays [*7. W=##.##].
[W] is the width of the paper.
8) • Using the 7 Numerical Keys, input four digits.
Example)
Press the 7 Numerical Keys in the following order.
However, input a value (W) between 8.27 and 14 inch.
Note
0 8 2 7
1 1 6 9
To clear the input number to 0, press the 8 Clear Key.
8-3. Corner-Stitching