DUPLO CORPORATION System 4000 DYNAMIC ... - Godar Machinery

More documents

Recommendations

Info

9. Binding 48 9-1. Using the Auxiliary Roller Stay • The auxiliary roller stay for applying conveyance force to the paper can be attached to this unit at three locations. • To prevent guides from contacting each other, this unit is provided with sensors at A, B and C . If the auxiliary roller stay is attached to any one of these sensors, size cannot be changed. 1 Attaching Fit the auxiliary roller stay to the square hole on the bracket at the R side. Auxiliary roller stay A Folding section Stitching head C B A Auxiliary roller stay Section A Auxiliary roller stay Section B Auxiliary roller stay Section C Bracket Auxiliary roller stay A Bracket Auxiliary roller stay B Auxiliary roller stay B
2 Attaching Conditions A m ? Attaching Conditions for Positions A and B Attaching Conditions for Position C Saddle-Stitching Folding ? means “attach”. m means “do not attach”. Stitching and Folding Conditions and Paper Length Saddle-Stitching Folding 17.72-18.50 11-17.72 Side-Stitching No Folding Side-Stitching No Folding –––––– 7.88-9.48 No Stitching and Folding No Stitching and Folding 14.00-18.50 (: inch) Side-Stitching No Folding (: inch) Side-Stitching No Folding 7.88-14.00 7.88-9.48 –––––– All paper –––––– All paper Paper L 9. Binding 49
Page 1 and 2: System 4000 DYNAMIC BOOKLET MAKER D
Page 3 and 4: INTRODUCTION Thank you for purchasi
Page 5 and 6: CAUTIONS: Do not use flammable spra
Page 7 and 8: 2. Usage Precautions 2-1. Power Sup
Page 9 and 10: 1 Entrance Section 3-2. Internal Pa
Page 11 and 12: 3 Folding Section ep 3. Names and F
Page 13 and 14: Control Panel 2 1 Lamps/Displays 1
Page 15 and 16: Operation Keys Display Function bmS
Page 17 and 18: No. Name Function 1 2 3 4 5 6 7 8 9
Page 19 and 20: 4. Insert the wire from the 2 Upper
Page 21 and 22: 1. Rotate the 8 triangular knob to
Page 23 and 24: 5. Stitching Range Stitching Positi
Page 25 and 26: 6. Stitching Normal Size Paper Do n
Page 27 and 28: 6.Stitching Normal Size Paper 5. Ad
Page 29 and 30: 6-1-4 Points to remember when paper
Page 31 and 32: 6. Stitching Normal Size Paper 6-2.
Page 33 and 34: 4) • The unit selected at 3) will
Page 35 and 36: 6-6. After Starting To finely adjus
Page 37 and 38: 7. Memorizing • The bs Memory Inp
Page 39 and 40: 5) • Press bl Select Fold Key and
Page 41 and 42: 10) • Input the length [S] from t
Page 43 and 44: • To change the input, input the
Page 45 and 46: 8) • Using the 7 Numerical Keys,
Page 47 and 48: When Corner-Stitching at Right Side
Page 49: 8-4. No-Stitching No-Folding Use th
Page 53 and 54: If the paper skews immediately afte
Page 55 and 56: 5 Loosen the knob screw at (D), and
Page 57 and 58: 9-8. Using the Guides After Folding
Page 59 and 60: 3 Adjusting the press rollers 3 lev
Page 61 and 62: 10. Using Function Keys Operating t
Page 63 and 64: • Pressing 7 of the 7 Numerical K
Page 65 and 66: 12. LCD Error Messages and Correspo
Page 67 and 68: • Display when the paper jam has
Page 69 and 70: 13. The Unit will Stop in These Cas
Page 71 and 72: 15. Maintenance of the Stitching He
Page 73 and 74: This page is a blank page.
Page 75 and 76: This page is a blank page.

DUPLO CORPORATION System 4000 DYNAMIC ... - Godar Machinery

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?