Renesas Flash Programmer user manual

More documents

Recommendations

Info

User Manual: RENESAS Flash Programmer (5) Selection of program file Step 1: Clicking the Browse… button in the User/Data area: of the program file area displays the [Open File] dialog box. Figure 4-13. Main Window Step 2: Select “NGX_RX62N_100pin_blinky.hex” in the [Open File] dialog box, and then click the Open button to open the main window. Figure 4-14. [Open File] Dialog Box 22 www.ngxtechnologies.com
User Manual: RENESAS Flash Programmer (6) Execute the [Program] command Step 1: Click the [Microcontroller] menu and select the [Program] command. A check mark is then placed on the left of the command, and the command is assigned to the Start button. Figure 4-15. Main Window Step 2: After clicking the Start button, execute the [Program] command for R5F562N8B. Remarks 1. When necessary, insert the target microcontroller (microcontroller to be programmed) into the program adapter, then execute the [Program] command. 2. When supplying VDD power to the target system, first turn off the power, connect the target system (for programming), and then turn on the power and execute the [Program] command. 3. When the [Program] command is executed, programming is performed after the block with data is Erased. To erase all blocks, set [All Erase Before Program] in the [Flash Program Options] category in the [Other Settings] tab of the [List of Settings] dialog box to “True.” 23 www.ngxtechnologies.com
Page 1 and 2: User Manual: RENESAS Flash Programm
Page 21: User Manual: RENESAS Flash Programm
Page 29: User Manual: RENESAS Flash Programm

Renesas Flash Programmer user manual

Create successful ePaper yourself

Delete template?

Save as template?