Renesas Flash Programmer user manual

More documents

Recommendations

Info

User Manual: RENESAS Flash Programmer 1.0 INTRODUCTION Renesas Flash Programmer (known hereafter as RFP) is software that erases, writes, and verifies programs on the target system or program adapter on which a Renesas Electronics single-chip microcontroller with on-chip flash memory is mounted by using an E1 emulator (E1), E20 emulator (E20), or the on-chip debug emulator with programming function,QB-MINI2 (known hereafter as MINICUBE2), or a serial interface. Note: We have verified using E1 emulator. 1.1 Features • Writing controlled by the host machine • Graphical user interface (GUI) specific to writing • Writing settings can be saved in a workspace file • Microcontroller-specific information required for writing is included in the product package as a device information file 1.2 Writing Quality Thoroughly confirm, verify and evaluate the following points before using RFP, in order to improve the writing quality. • Design circuits as described in the user’s manual for the target microcontroller, E1, E20, and MINICUBE2. • Use the microcontroller and RFP as described in the user’s manual of the target microcontroller, RFP, E1, E20, and MINICUBE2. • Make sure that the power supplied to the target microcontroller is stable. 1.3 Supported Microcontrollers Microcontrollers supported by RFP are listed on the following websites: • Japanese: http://japan.renesas.com/rfp • English: http://www.renesas.com/rfp 1.4 Operating Environment This section explains the following items with respect to the operating environment: • Hardware environment • Software environment 4 www.ngxtechnologies.com
User Manual: RENESAS Flash Programmer 1.4.1 Hardware environment (1) Host machine • PC/ATTM compatible • Processor: 1 GHz or higher (RFP can be used with hyperthreaded and dual core CPUs) • Main memory: 1 GB or more (2 GB or more when using 64-bit Windows 7®); 2 GB or more recommended • Display: Resolution of 1,024 x 768 or higher and 65,536 or more colors • Interface: USB 2.0 (when using E1, E20, MINICUBE2, USB Direct) (2) Tools used • E1 • E20 • MINICUBE2 1.4.2 Software environment • Windows XP®(32-bit only) • Windows Vista® (32-bit and 64-bit) • Windows 7®(32-bit and 64-bit) • Microsoft .NET Framework 3.5 SP1 + Language pack • Microsoft Visual C++ 2008 SP1 Redistributable Package (x86) • Internet Explorer 6.0 or later 2.0 INSTALLATION The Renesas Flash programmer bundled with the CubeSuite+ software package, while installing CubeSuite+ it is also installs Renesas Flash Programmer. If not installed with CubeSuite+, follow the below section. This section describes the following items: • Obtaining • Installation • Uninstallation • Updating RFP and firmware 2.1 Obtaining Download the product package (RFP, USB driver, device information file, and utility) from the following websites: Japanese: http://japan.renesas.com/rfp English: http://www.renesas.com/rfp Caution Use of the latest version of software is recommended to guarantee RFP operation. 5 www.ngxtechnologies.com
Page 1 and 2: User Manual: RENESAS Flash Programm
Page 3: User Manual: RENESAS Flash Programm
Page 29: User Manual: RENESAS Flash Programm

Renesas Flash Programmer user manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?