F H M I A C D E - Moeller
F H M I A C D E - Moeller
F H M I A C D E - Moeller
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Interconnect Enclosures and Distribution Cabinets<br />
Patch Drawer, LWL-RGV30/PL/M<br />
N03803<br />
Fastening Set for Tubeless System, LWL-RGV30/BFS/TL/M<br />
• The patch drawer serves for mounting the adapters<br />
• 72 holes FC/PC, ST, SC or E2000<br />
• A patch drawer is devided into 3 shelves, each featuring 24 holes<br />
• Protected against unintended swing-out through a locking bar<br />
• Suitable for installation in the RGV30 base enclosure<br />
• Material: Powder-coated aluminium sheet, RAL 7035<br />
• Weight: Approx. 1.4 kg<br />
• Scope of delivery: 1 Patch drawer, 3 adapter ledges<br />
Fastening Set for Splice Cassettes SK120S or SK121, LWL-RGV30/BFS/SK12..<br />
• The fastening set is necessary for mounting the splice cassettes SK/120/S or SK/121 onto the false floor<br />
• Max. 36 units for ...-SK/120/S.. or max. 14 units for ...-SK/121..<br />
• Material: Powder-coated aluminium sheet, RAL 7035<br />
• Weight: Approx. 100 g<br />
• Scope of delivery: 1 Fastening set<br />
• The fastening set is necessary for mounting the LWL-SEC23/TL/KS/6SK... splice cassette set onto the false floor<br />
• The entry module permits fibre routing to any cassette entry<br />
• Max. 24 units of SK123 or SK223<br />
Available as sets of 6 splice cassettes each => max. 4 sets<br />
• Material: Powder-coated aluminium, RAL 7035<br />
• Weight: Approx. 100 g<br />
• Scope of delivery: 1 Fastening angle, 1 entry module with cover<br />
Fastening Brackets, ZPV-BL<br />
6794<br />
Steel Tower Fastening Set, LWL-RGV30/SMB<br />
• For fastening purposes outside the enclosure<br />
• Fastening brackets to be screwed onto the base frame<br />
• Material: Galvanized and passivated steel sheet<br />
• For mounting an RGV30 Interconnect Enclosure onto the cross-struts of a high-voltage line tower<br />
• Lower ledge for fixed mounting<br />
• By turning, the upper ledge can be adjusted to the slanted cross-struts<br />
• Material: Powder-coated aluminium sheet, RAL 7035<br />
• Scope of delivery: 2 Ledges, fastening material<br />
Strain Relief Set, LWL-RGV30/ZEL<br />
• For additional, external strain relief of cables<br />
• To be mounted onto the base plate of the enclosure<br />
• Cables are fixed onto a rail by means of strain relief clamps<br />
• Material: Powder-coated aluminium sheet, RAL 7035<br />
• Scope of delivery: 2 Angles, 1 rail, fastening material<br />
Rain Run-off Roof, LWL-RGV30/RD<br />
• For additional protection of outdoor applications<br />
• To be mounted onto the top of the enclosure<br />
• In the event of retrofitting, 2 holes need to be drilled<br />
• Material: Powder-coated aluminium sheet, RAL 7035<br />
• Scope of delivery: 1 Rain run-off roof, fastening material<br />
108