F H M I A C D E - Moeller
F H M I A C D E - Moeller
F H M I A C D E - Moeller
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Accessories<br />
Splice Cassette SE, LWL-SK123..<br />
N02803<br />
• Splice storage for all kinds of optical fibres<br />
• Single Element (SE) splice cassette (multi-fibre loose tube upon multi-fibre loose tube)<br />
• Height 6 mm, mechanically compatible with splice cassette LWL-SK223..<br />
• Thanks to its round shape it is optimally suitable for SEC23<br />
• Laying of an 8-shaped loop is possible<br />
• Special mounting holder (snap-on) at the back of the splice cassette<br />
• Splice cassettes are to be mounted in a slanted position, so they can be turned (90°) and provide easy<br />
access to each splice without affecting fibres in the adjacent cassettes<br />
• 2 Entries each at the front and back<br />
• Installation of different splice protection holders is possible through a snap-in system<br />
• Bending radius: >30 mm<br />
If only one splice protection holder is used: >35 mm<br />
• Capacity<br />
Splices 16 splice protection tubes Ø 2.5 mm (heat-shrinkable)<br />
24 sandwich splice protectors (sandwich)<br />
Splice protection holders 2x ...-SRH8 or 2x ...-SWH12<br />
• Reserve fibre length approx. 80 m<br />
• Material: Polycarbonate UL94HB, colour RAL 9001<br />
• Weight: 36 g<br />
• Scope of delivery: 1 Splice cassette (excl. splice protection holder)<br />
Splice Cassette SC, LWL-SK223..<br />
N02903<br />
141<br />
Stripping dimensions (cm):<br />
Windings Min. Max.<br />
1 39 51<br />
1.5 55 71<br />
2 78 102<br />
2,5 94 112<br />
3 110 142<br />
Stripping dimensions (cm):<br />
Windings Min. Max.<br />
1 top 47 49<br />
1 base plate 27 29<br />
2 top 98 82<br />
2 base plate 78 62<br />
3 top 147 108<br />
3 base plate 127 88<br />
• Splice storage for all kinds of optical fibres<br />
• Single Circuit (SC) splice cassette (distribution of the fibres from one multi-fibre loose tube to several<br />
splice cassettes)<br />
• “Cassette in a cassette” system, i.e. there are in fact 2 splice cassettes each 3 mm high ⏐ one LWL-<br />
SK223.. accommodates 2 Single Circuit (SC) splice cassettes<br />
• 6 mm high and mechanically compatible with splice cassette LWL-SK123..<br />
• Thanks to its round shape it is optimally suitable for SEC23<br />
• Laying of an 8-shaped loop is possible<br />
• Special installation holder (snap-on) at the back of the splice cassette<br />
• Splice cassettes are to be installed in a slanted position, so they can be turned (90°) and provide easy<br />
access to each splice without affecting fibres in the adjacent cassettes<br />
• 2 Entries each at the front and back<br />
• Splice protection holder integrated into the splice cassette<br />
• Bending radius: >30 mm<br />
• Capacity<br />
Splices 2x4 splice protection tubes Ø 2.5 mm, length 40 mm<br />
(heat-shrinkable)<br />
2x6 sandwich splice protectors (sandwich)<br />
• Reserve fibre length approx. 50 m<br />
• Material: Polycarbonate UL94HB, colour RAL 9001<br />
• Weight: 67 g<br />
• Scope of delivery: 1 Splice cassette<br />
Height of the cassette: 6 mm<br />
View when open<br />
LWL_SK123<br />
LWL_SK223