F H M I A C D E - Moeller

Termination System for 19” Technology
19” Cable Storage Frame, 2U, Swing-Type, EV-KA 19H2
N0801
EV_KA_2
19” Cable Distribution Box, 4U, KAB 19H4/8K/32PG9
N1101
KAB_4
• The 19” cable storage frame serves for storing reserve and excess lengths of patch cords
and pigtails
• High mechanical protection through the closed design and internal storage of excess
lengths
• Particularly suitable for 19” cabinets featuring a width of 600 mm
• Thanks to the swing-plate, no patch cord reserves from a routing duct or a storage compartment
are necessary
• The swing-plate is left or right-hinged
• The forced lateral entry and outlet for the patch cords guarantee easy access to the storage
frame
• Same layout as the 19” patch panel, 1U, swing-type
• Semi-circular patch cord guides can be installed for neat routing of the patch cords
• Capacity
Patch cord excess length 200 m with ø 2.7 mm
Patch cord guide, semi-circular Max. 7 units
• Material Powder-coated sheet steel, RAL 7035
• Scope of delivery
1 Basic enclosure, 1 swing-plate, fixing material
• The 19” cable distribution box serves for distributing multi-fibre loose tubes of a fibre
optic cable featuring a large number of fibres to several patch panels
• Height 4U
• The cover for protecting the multi-fibre loose tubes is easy to remove
• Cable strain relief by means of tie wraps
• A strain relief set is available as accessory for additional strain relief of the central
strength member or Kevlar reinforcement
• Multi-fibre loose tubes are distributed in the cable distribution box and routed to the
patch panels through kink-proof patch panel connection tubes
• Capacity
Cable entry Max. 8 cables
Cable outlet Max. 32 STVR9 patch panel connection tubes
• Material Powder-coated sheet steel, RAL 7035
• Scope of delivery
1 Basic enclosure, 1 fastening angle, 1 cover, fixing material
135