F H M I A C D E - Moeller
F H M I A C D E - Moeller
F H M I A C D E - Moeller
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Interconnect Enclosures and Distribution Cabinets<br />
Distribution Cabinets<br />
Plastic Distribution Cabinet VK1-SO-K-SH/00<br />
N3399<br />
• Distribution cabinet for outdoor base mounting (Austrian standard ÖNORM E 4382 size S5 or DIN 43629 size 1)<br />
• Junction for several fibre optic cables<br />
• 90° swing-type mounting frame for mounting an RGH6455 interconnect enclosure<br />
• Additional adapter rails and a mounting plate for wall mounting allow the installation of OM1 and KM3 sleeves<br />
• Cable insertion at the bottom, through the base<br />
• Cable protection plate for orderly insertion and laying of the cables<br />
• Support frame for approx.15 m cable reserve at the rear<br />
• Door with clip-down handle for semi-cylinder, 40 mm long and up to 2.5 mm protruding cylinder head<br />
• Degree of protection: IP43<br />
• Material<br />
Cabinet and door: Glass-fibre reinforced polyester, RAL 7035<br />
Inside elements: Sheet steel, galvanized or powder-coated, RAL 7035<br />
• Weight: Approx. 36 kg<br />
• Scope of delivery: 1 Cabinet, 1 door (pre-assembled), 1 mounting frame, 1 strain relief rail, 1 cable protection plate, 1 clip-down handle<br />
Base for VK1-SO<br />
• Base for mounting the distribution cabinet VK1-SO-K-SH/00<br />
• Fastening dimensions according to Austrian standard ÖNORM E4382 size S5 or DIN 43629 size 1<br />
• Height 900 mm<br />
• C-profile rail for strain relief of fibre optic tubes with cable clips<br />
• Sealing of the fibre optic tubes with UF1 universal fitting or RAS tube end closure<br />
• Material: Glass-fibre reinforced polyester, RAL 7035<br />
• Weight: Approx. 18 kg<br />
• Scope of delivery: 1 Base, 1 C-profile rail, 4 M12 x 30mm screws<br />
109<br />
Plastic<br />
VK1<br />
RGH<br />
Cable<br />
protection<br />
device<br />
Base<br />
Sectional view - Mounting<br />
frame with RGH swung out<br />
VK1_K
Change language