F H M I A C D E - Moeller
F H M I A C D E - Moeller
F H M I A C D E - Moeller
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Accessories<br />
Universal Fitting LWL-UF1/R.<br />
N5997<br />
Univ_Fitting<br />
Accessories for LWL-UF1/R. Universal Fitting<br />
Cable Sealing<br />
• For sealing an optical cable tube (conduit) connected to two cables<br />
• Mounts to the outlet end of the LWL-UF1/R./00/00 universal fitting<br />
• The split design makes it suitable for installation around cables already blown in<br />
• Cable diameter<br />
Cable sealing 12/12 2 cables ø 12 mm<br />
Cable sealing 12/14 1 cable ø 12 mm and 1 cable ø 14 mm<br />
• Material: Special rubber compound<br />
• Scope of delivery: 1 Cable sealing<br />
• The universal fitting serves for strain relief and sealing of optical cable tubes (conduits)<br />
and blown-in cables<br />
• End or connection fitting for direct underground laying<br />
• The split design makes it suitable for installation around cables already blown in<br />
• For optical cable tubes (conduits) of ø 40 and 50 mm<br />
• Sealings can be used again<br />
• Universal end fitting LWL-UF1/R./KU/00<br />
- For sealing optical cable tubes (conduits) connected to cables<br />
- Cable diameter 10-20 mm (onion ring sealing)<br />
- The cable can be removed without impairing the tightness, e.g. in case of a malfunction<br />
• Universal end fitting LWL-UF1/R./B/00<br />
- For sealing spare optical cable tubes<br />
• Connection fitting LWL-UF1/R./R./00<br />
- For sealing a tube-to-tube connection<br />
- A set of bolts is available as accessory in case of cables blown in through the fitting<br />
• Universal fitting LWL-UF1/R./00/00<br />
- The outlet end is compatible with all kinds of sealings (see accessories)<br />
• Mechanical strength<br />
Impact 1 kg Steel ball, 2 m fall (1 x at the centre,<br />
1 x turned by 90°)<br />
Impact 6 kg Guillotine, 35 cm fall (1 x at the centre,<br />
1 x turned by 90°)<br />
• Pressure resistance<br />
Permanent pressure 0.4 bar above atmospheric<br />
Tight from -15°C to +50C°<br />
• Tightness of the cable<br />
Strain ≤ 250N<br />
Bending (2 twice) 500N, max. deflection 45°, point of application<br />
250 mm from the fitting<br />
• Tightness of the tube<br />
Strain 1000N<br />
Bending Tube ø 50 mm, internal pressure 0.4 bar above<br />
atmospheric, bending radius 750 mm according to<br />
DIN 8076-3<br />
• Degree of protection IP68<br />
• Temperature changes -15°C to +50°C, 10 times<br />
• External pressure resistance 4 m water column<br />
• Material<br />
Fitting POM plastic<br />
Sealings Special rubber compound<br />
• Weight Approx. 0.5 kg<br />
• Scope of delivery<br />
Universal end fitting: 2 Half shells, 1 sealing ring, 1 onion ring sealing<br />
or blank closure, 2 strain relief rings, 1 cleaning<br />
cloth, 1 copy of Instructions for Installation,<br />
fastening bolts<br />
Universal fitting: 2 Half shells, 1 sealing ring, 2 strain relief rings,<br />
1 cleaning cloth, 1 copy of Instructions for<br />
installation, fastening bolts<br />
Connection fitting: 2 Half shells, 1 sealing ring, 4 strain relief rings,<br />
1 cleaning cloth, 1 copy of Instructions for<br />
Installation, fastening bolts<br />
146