F H M I A C D E - Moeller

Termination System for 19” Technology
19” Patch Panel, 2U, Recessable Version, Empty, DNW-SER/19H2
N01406 Mas_DNW_SER_19H2
• The 19” patch panel serves as a terminal for a fibre optic cable routed to a connector, and for storing splices
• Empty enclosure (without adapters and pigtails)
• Front handles for fixing the NWS-KFS/19 cable management system are included in the scope of delivery
• Two removable blanks at the rear for mounting cable entry angles or cover plates
• Installation point for strain relief (central strength member, Kevlar) of the cable
• For changing the adapters, the removable cover can be pushed back
• Holes for straight entries are closed with blind plugs
• Capacity
Straight entries with cable glands: 2 cables Ø 5-15 mm (M20) and 2 STVR9 patch panel connection tubes
Slanted entries with cable entry angles 1U: 4 cables Ø 5.5-18.5 mm (M12-M25) or 8 uncut cables of up to 16 mm
Slanted entries with cable entry angles 2U: 2 cables Ø 5.5-26.5 mm (M12-M32) or 6 cables Ø 5.5-7 mm or 8 cables Ø 5.5-7 mm
Splice cassettes: 8x DNW-SK/121
Adapters: 18-48 x FC/PC, ST, SC duplex, SC simplex, E2000
• Numbering stickers included
• Version: Recessable; plug-in module is continuously recessable from 0 to 60 mm
• Material: Sheet steel, powder-coated, RAL 7035 pale grey
• Weight: Approx. 5.3 kg
• Scope of delivery: 1 Basic enclosure, 1 cover, 1 front plate, 4 plastic twisting clamps, fixing material, 2 front handles, 4 blind plugs, splice cassettes and
splice protection holders see table
No. of Fibres Splice Cassettes DNW-SK/121 Splice Protection Holders DNW-SRH12
24 2 4
36 3 6
48 4 8
Hole Pattern
Connector type FC/PC ST SC simplex (=E2000, LC duplex) SC duplex
125
DNW_SER_19H2