Mlll Pro - Digital readouts, DRO, Magnum Measuring Systems, sargon
Mlll Pro - Digital readouts, DRO, Magnum Measuring Systems, sargon
Mlll Pro - Digital readouts, DRO, Magnum Measuring Systems, sargon
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10<br />
Bolt Hole <strong>Pro</strong>grams<br />
Description<br />
A bolt hole pattern is a series of holes evenly spaced around the circumference of a<br />
circle. There is a sample demo bolt hole pattern in the Mill <strong>Pro</strong>'s memory, you can<br />
change it to create a new pattern, it may then be used as many times as required by<br />
running the program. It will stay intact even when the Mill <strong>Pro</strong> is off.<br />
The Mill <strong>Pro</strong>'s memory hold one bolt hole program with up to 9999 holes.<br />
Bolt hole<br />
pattern around<br />
the entire<br />
circumference<br />
of a circle<br />
The following is the sample demo pattern, its start angle and end angle are the same, the<br />
Mill <strong>Pro</strong> will evenly space the holes around the circumference of the bolt hole pattern.<br />
90 degrees<br />
+Y<br />
4 Holes, evenly spaced<br />
Radius = 0.5000 inches<br />
Hole 2<br />
START ANGLE<br />
/<br />
I END ANGLE<br />
,,<br />
180 degrees -X +X 0 degrees, 360 degrees<br />
.Y<br />
270 degrees<br />
The following information have already been saved into the Mill <strong>Pro</strong>'s memory:<br />
RADIUS 0.5000 inches<br />
START ANGLE<br />
90 degrees<br />
END ANGLE<br />
90 degrees<br />
NUMBER OF HOLES 4<br />
15