Mlll Pro - Digital readouts, DRO, Magnum Measuring Systems, sargon

While MENU is displaying, press X, Y or Z
to select an operating mode.
In NORmal mode, press the menu key
to display MENU.
In a selected operating mode ( BOLT, CONCAVE
CONVEX, LINE, REF or SENSOR,) press the
menu key to return to NOR mode.
,In a selected operating mode, press the start
/ key to run.
,In a selected operating mode press the next
key to move to the next step.
tl ';
if'
-ll
tJl
tt:
l
clear
I
1i
'"7".7
ii
/\
i\
/\
\a
\
\\\\\
,,//
bolute or \ Inch or
incremental
milimeter
display
display.
/t
/l
//
/
,il
/
/ l
-?---""''
I
,/:
-
. While MENU is displaying, press the
/ next key to scroll through MENU.
the optional RS232 interface is installed, press
,,,If
...' and hold the print key at power up while
'/
8.8 8.88 8 8 8 is flashing to set RS232 protocol.
infomation to the connecting COMPUTER
andlor PRINTER
Press the +l- key to toggle between inc and inc2.
\.
'\
Preset a dimension if in an incremental mode,
Set the DATUM of a workpiece if in
\ the absolute mode.
\.
\.
\....
.\ \. Center a dimension-divided by 2.
".. Display Cartesian or polar coordinates.
Press and hold at power up while 8 8 8 8 8 8.8.8. is flashrng
to set Scale Resolution, Scale direction, Diameter Enable and Near Zero Warnins.