LC Accessories
LC Accessories
LC Accessories
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pump <strong>Accessories</strong><br />
L C A C C E S S O R I E S<br />
256<br />
Hamilton Priming Syringe<br />
• Ideal for use with Waters pumps<br />
OPTI-PRIME Valve<br />
• Convenient – onehanded<br />
operation<br />
• Efficient – no need to<br />
remove syringe<br />
• Inert – PPS, TFE, and<br />
316SS wetted surfaces<br />
The syringe of the<br />
OPTI-PRIME serves as a<br />
handle to open the OPTI-<br />
In-Line Bubble Trap<br />
This handy accessory<br />
installs on pump inlet<br />
lines by slip fitting onto<br />
the connecting tubing.<br />
Bubbles in the solvent<br />
line are trapped before<br />
reaching the pump.<br />
Includes mounting<br />
bracket.<br />
HAMILTON PRIMING SYRINGE<br />
DESCRIPTION PART NO. PRICE<br />
10mL Gas-Tight Priming Syringe 81662<br />
Draw Needles for Waters Pump 25559<br />
© Copyright 2004 Alltech Associates, Inc.<br />
1896<br />
1898<br />
5506<br />
Valve open<br />
at 45º to<br />
prime pump<br />
Valve<br />
closed<br />
PRIME valve, allowing one-handed operation. At a 45°<br />
angle, air bubbles rise to the top of the syringe, allowing<br />
purging and priming without removing the syringe.<br />
OPTI-PRIME VALVE<br />
DESCRIPTION PART NO. PRICE<br />
OPTI-PRIME Priming Valve 11647<br />
OPTI-PRIME Priming Valve w/Safety Syringe 11648<br />
Optimize Safety Syringe 11649<br />
IN-LINE BUBBLE TRAP<br />
Slip fits to 3.0,<br />
2.2 or 1.5mm<br />
i.d. tubing<br />
DESCRIPTION PART NO. PRICE<br />
In-Line Bubble Trap 01-0221<br />
4042<br />
Pump Inlet Kit<br />
Install the Pump Inlet Kit<br />
between the mobile phase<br />
reservoir and the pump allow<br />
rapid priming and solvent<br />
changeover. A luer-lock<br />
adapter in the side port easily<br />
attaches to a priming syringe.<br />
Includes: 1 three-way valve, 1<br />
luer adapter, 2µm inlet filter,<br />
5617<br />
100cm x 1/8"o.d. x 1/16" TFE tubing, 2–1/8" flange-free<br />
fittings and ferrules.<br />
LO-Pulse ® Dampener<br />
• 95% pulse reduction<br />
• Only 900µL internal<br />
volume<br />
As a pressure pulse<br />
enters the dampener,<br />
the flexible diaphragm<br />
transfers the pulse to<br />
the compressible fluid<br />
resulting in a 95+%<br />
reduction in pressure fluctuation. The low internalvolume<br />
(only 900µL at 6,000psig) and flow-through<br />
design minimize gradient delays.<br />
LO-Pulse ® Dampener Specifications<br />
Flow Path Material: PEEK or 316 Stainless Steel<br />
Internal Volume:<br />
0.9mL<br />
Workable Pressure Range: 500-6000psig<br />
Maximum Temperature: 100°C<br />
Dampener Mechanism: Compressible Fluid<br />
2349<br />
PUMP INLET KIT<br />
DESCRIPTION PART NO. PRICE<br />
Pump Inlet Kit 39652<br />
Replacement Inlet Filter 9400<br />
LO-PULSE ® DAMPENER<br />
DESCRIPTION PART NO. PRICE<br />
Stainless Steel 20-0218<br />
PEEK 120312<br />
Diaphragm Replacement Kit 120139<br />
Need a Liquid Pressure<br />
Gauge?<br />
See page 277 for a complete<br />
selection.<br />
Contact your Alltech office or distributor for current or local prices.<br />
2350
Change language